Erik's Build Thread, 914-6 Conversion |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Erik's Build Thread, 914-6 Conversion |
B3owulf |
Mar 27 2023, 03:23 PM
Post
#1
|
Newbie Group: Members Posts: 45 Joined: 4-September 21 From: Clarksville TN Member No.: 25,879 Region Association: MidAtlantic Region |
This will be a build thread for my 914 build. The build is ongoing, I will post updates here and hopefully keep progressing! I posted most of these pictures before, just trying to put it in one spot for a continual thread.
The end goal of the build is to have a fun autocross car that is nice enough to drive for date night or cars and coffee. It will not be a concourse car or race competitively, just out to have fun. This car was a stalled project that I purchased as a roller and a pile of parts. I purchased a set of wheels for my Cayman and the seller had a 914 in his garage. After going back and forth for a bit I finally convinced my wife to let me buy it. It came with a ton of spare parts and the first couple months with the car was mainly just figuring out what I had and what I needed. (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952190.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952191.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952191.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952192.4.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952192.5.jpg) Part of the deal was my wife got to pick the color. She picked Ravenna Green and it turned out good! I spent more than I wanted on the paint but less than I should have. It looks great from a distance, OK up close, and a PCA concourse nerd would throw me out. (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952193.6.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952193.7.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952194.8.jpg) Found some cool wheels online and got the windows, door handles, hood, and trunk mounted up. Unfortunately progress stopped for a while after this due to work requirements which had me away from home for a while. (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952194.9.jpg) Got a few weeks back home and scored some more parts off of ebay. Got a wrecked 911, a 914 motor, and an MFI 6 cylinder. I sold the 911 and left the MFI engine with my helper to figure out. (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952195.10.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952195.11.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.postimg.cc-25879-1679952196.12.jpg) Got back home 6 months later and was shocked to find my 2 year old had made no progress on the build. However, I had a huge pile of -6 conversion parts from Ben and others waiting for me so its time to get after it! I will keep posting as I make progress. |
B3owulf |
Jul 15 2024, 07:11 AM
Post
#2
|
Newbie Group: Members Posts: 45 Joined: 4-September 21 From: Clarksville TN Member No.: 25,879 Region Association: MidAtlantic Region |
Quick update, I made some progress on the four cylinder and got the 6 conversion parts boxed up for the moment.
I had a set of weber carbs that were quite nasty but cleaned up well, I rebuilt them with some old stock weber rebuild kits I found. I installed a new distributor, carbs, and cleaned up tin on the 1.7. Just waiting on a couple small parts and I will join it to the trans and get started with wiring and fuel (if I can get my work schedule to cooperate). I found two stripped out studs when installing the manifolds. Looks like the engine's previous owner tried the JB weld repair. It did not work. I installed some heli-coils and we are back on track. I listed the 2.4 for sale locally at the "wouldn't it be nice" price. If it sells it sells but I'm also putting some money aside for a rebuild. If all goes well I will have a drivable car by the end of the year and then can focus on rebuilding the 2.4. (IMG:http://www.914world.com/bbs2/uploads_offsite/i.ibb.co-25879-1721049068.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.ibb.co-25879-1721049069.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.ibb.co-25879-1721049069.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.ibb.co-25879-1721049070.4.jpg) |
Lo-Fi Version | Time is now: 18th September 2024 - 07:01 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |