 Help me set up these Webers, Basic Weber questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| MikeK |
 Sep 27 2024, 01:06 PM
Post
#1
|
|
Member  Group: Members Posts: 132 Joined: 15-June 23 From: 80906 Member No.: 27,418 Region Association: Rocky Mountains  |
Hi friends. I'm currently installing some Weber clones on my 70 and have run into some issues. I'm using a CB linkage and filter bases. I tried installing the carbs with the linkage to the rear of the car, but the drop links hit the torsion springs used on the trunk. I flipped the bases so the crossbar is towards the front of the car, but the linkage needs to rotate counter-clockwise (see photo) in order to operate the carbs. I guess I could run the throttle arm on the top of the linkage and pull it that way, but I would prefer the arm to be in the down position. I was thinking maybe a custom cable which would be longer and come in from the back or perhaps some kind of lever to reverse the rotation?
I don't know, but I'm sure this has been dealt with in the past. Just looking for an elegant solution. As a side note, tall air cleaners most definitely don't fit the passengers side. (IMG:http://www.914world.com/bbs2/uploads_offsite/www.thesamba.com-27418-1727464006.1.jpg) Thanks in advance. |
   |
 
|
  |
Replies
| NARP74 |
Sep 28 2024, 10:32 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,300 Joined: 29-July 20 From: Colorado, USA, Earth Member No.: 24,549 Region Association: Rocky Mountains |
The two setups I have, one is round cross bar, the other is center pull, pics later hopefully.
I would love to see the tuning article, always looking for more experience. |
|
|
|
| IronHillRestorations |
Sep 29 2024, 04:29 PM
Post
#3
|
|
I. I. R. C. Group: Members Posts: 6,790 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None 
|
QUOTE(NARP74 @ Sep 28 2024, 08:32 AM)  The two setups I have, one is round cross bar, the other is center pull, pics later hopefully. I would love to see the tuning article, always looking for more experience. carb tuning Post #6 a AFR gauge is the way to go for carbs. |
|
|
|
Posts in this topic
MikeK Help me set up these Webers Sep 27 2024, 01:06 PM
NARP74 The tangerine solution is elegant if it fits your ... Sep 27 2024, 04:28 PM
MikeK
The tangerine solution is elegant if it fits your... Sep 28 2024, 08:25 AM technicalninja Unless you've changed them the carbs come with... Sep 27 2024, 08:08 PM MikeK
Unless you've changed them the carbs come wit... Sep 28 2024, 08:34 AM dtmehall I have an old CB (back then Claudes Buggies) linka... Sep 27 2024, 08:57 PM MikeK
I have an old CB (back then Claudes Buggies) link... Sep 28 2024, 08:36 AM Jack Standz Move the bracket on the cross bar to something lik... Sep 28 2024, 01:32 AM MikeK
Move the bracket on the cross bar to something li... Sep 28 2024, 08:38 AM barefoot Here's my set-up. i had to flip the linkage a... Sep 28 2024, 07:13 AM MikeK
Here's my set-up. i had to flip the linkage ... Sep 28 2024, 08:43 AM 930cabman I have several hex bar linkage setup's on the ... Sep 28 2024, 08:45 AM MikeK
I have several hex bar linkage setup's on the... Sep 28 2024, 08:58 AM NARP74 Maybe if you move the pressure regulator you can g... Sep 28 2024, 08:50 AM MikeK
Maybe if you move the pressure regulator you can ... Sep 28 2024, 09:05 AM NARP74 I have two different setups, different linkages. ... Sep 28 2024, 09:12 AM IronHillRestorations The only crossbar system I like has a round crossb... Sep 28 2024, 10:01 AM Jack Standz
[quote name='technicalninja' post='3170120' date=... Sep 28 2024, 11:50 AM MikeK
[quote name='MikeK' post='3170185' date='Sep 28 2... Sep 28 2024, 03:35 PM anderssj Running Dells on my car, but the linkage set up is... Sep 28 2024, 12:28 PM MikeK
Running Dells on my car, but the linkage set up i... Sep 28 2024, 03:51 PM anderssj You may find this chart helpful too:
As you can... Sep 28 2024, 01:13 PM Jack Standz Best wishes for your project.
That is the exac... Sep 29 2024, 12:39 AM NARP74 Cheers! I didn't know that was yours. Gi... Sep 30 2024, 09:10 AM |
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd December 2024 - 04:26 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.