 CV Joint Comparison Info, Good To Know |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914Sixer |
 Feb 23 2025, 10:11 AM
Post
#1
|
|
914 Guru  Group: Members Posts: 9,083 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region 
 |
Thought I would post this up. From what I am seeing, the VW bus 100mm CV should be a direct bolt on with NO machining on stock 914 shaft like the 944 CV requires Should work with 911SC flanges and stub axle. The 17 degree angle should have NO bearing on stock use since 914 is 12 degrees.
Click to open chart. Attached thumbnail(s)     
|
   |
 
|
Posts in this topic
sixnotfour I used bus axles when I narrowed a set of trailing... Feb 23 2025, 11:32 AM 930cabman Great information, thank you for posting Feb 23 2025, 02:54 PM jim_hoyland Who sells the bus 100mm CVs ? And, do they require... Feb 23 2025, 05:57 PM thomasotten I thought the Bus CV's required different flan... Feb 25 2025, 07:03 PM
914Sixer Thomas,
They do require 915 transmission 100mm coa... Feb 26 2025, 07:13 AM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th February 2025 - 05:24 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.