Pic Request : Rotor while engine is well timed (27deg BTDC) Options

[Literati914]

I'm hoping someone can snap a picture of the distributor with it's cap off - to show where the Rotor is pointing while the engine is actually timed to 27 degrees (the normal factory timing over all the 914 typeIV engines, I believe).

No adjustments would be needed on your end of course - BUT to make the picture usable it would require the photographer to rotate his/her engine to the initial timing "0" degree mark on the compression stroke with the engine off. (your car stays timed at 27 of course)

Why do I need this? - because I'd like to get the rotor in the ball-park before my assistant (w/ very limited experience) tries to maintain 3500rpm with my somewhat sticky throttle (to address soon).

So, may be kind of a hassle but I'd think it could also help others trying to time their engines for the first time too. We know what the rotor looks like at TDC, but there are no pictures available like what I'm asking for (I looked but couldn't find). I'd appreciate it if someone could help please!

ps - if posting the pic is an issue, I can provide my phone# so you can text it to me and I'll post it. LMK

[Literati914]

I think you want to set total advance.
Due to manufacturing tolerances of the camshafts, intermediate drives, production (sloppy) distributors, dwell angle, rotor button etc., etc. no two distributors will index exactly the same in any two engines.

This statement is actually accurate I'd assume.
However I'm not trying to make my final setting off of a picture - as I said.
Take five cars and if they're set correctly the rotor will be in the same basic place every time, relative to the distributor body/plug tower. Simple.