 upgrading frt sway from 15-19mm, through body upgrade |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| d914 |
 Feb 6 2005, 12:46 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,345 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States  |
Ok I got the 19 mm sway and new bushings. What else to I need and any gotcha's do I need to know about or is a straight forward bolt out bolt in???
|
   |
 
|
  |
Replies
| seanery |
Feb 6 2005, 03:51 PM
Post
#2
|
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,854 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
Greg,
I haven't done the upgrade, but I've installed a 15mm into a car that didn't have one. Do the droplinks fit on the new bar? Do you have all the bushings for the new bar? If so, it should be pretty easy. Remember one side gets the bushings put on before it goes in the car, the other has to wait till the bar is in place. |
|
|
|
Posts in this topic
d914 upgrading frt sway from 15-19mm Feb 6 2005, 12:46 PM
xsboost90 and if one is to run 160lb springs in the rear w/ ... Feb 6 2005, 12:55 PM d914 my guess, 50/50 shot, more spring more bar, go 22m... Feb 6 2005, 12:58 PM Aaron Cox ive got 140 lb springs with a 23mm bar up front <... Feb 6 2005, 01:03 PM J P Stein There is a 914 "sweet spot" set-up for a mild AXer... Feb 6 2005, 01:17 PM d914 Ok guys, I got wrench in hand....what else to I ne... Feb 6 2005, 01:21 PM xsboost90 i can deal with that! Feb 6 2005, 01:22 PM d914 http://www.914world.com/bbs2/html/e... Feb 6 2005, 01:23 PM airsix I've got 21mm front torsion bars, 19mm front s... Feb 6 2005, 03:46 PM
d914 thanks got it . I was more worried about fitting t... Feb 6 2005, 05:07 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th December 2024 - 11:33 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.