![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
RUDEPEST |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 3 Joined: 1-March 05 From: SAN JOSE, CA Member No.: 3,686 ![]() |
I have a 73 914 with a 450 hp v8 and have went through 3 transmission and am in the process of putting a 915 in it with a wevo side sift kit installed but I was told that I need to change the gears to work and was hoping that someone out there could help with the proper gears so I don't have to spend money learning which gears work.
thanks, Keith |
![]() ![]() |
Andyrew |
![]()
Post
#2
|
Spooling.... Please wait ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California ![]() ![]() |
Call Renegade hybrids... They have a solution for the 915 trani for gearing...
off their web site "CUSTOM 3.1:1 TALL RING & PINION: The stock gear ratios in the 915 are rather low for use with a V-8. Thus, we offer our custom made, tall ring and pinion, which will dramatically increase your top speed in each gear. Installing this ring and pinion in a 915 transaxle will create ideal gear ratios for use with a V-8 engine. " |