![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
RUDEPEST |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 3 Joined: 1-March 05 From: SAN JOSE, CA Member No.: 3,686 ![]() |
I have a 73 914 with a 450 hp v8 and have went through 3 transmission and am in the process of putting a 915 in it with a wevo side sift kit installed but I was told that I need to change the gears to work and was hoping that someone out there could help with the proper gears so I don't have to spend money learning which gears work.
thanks, Keith |
![]() ![]() |
airsix |
![]()
Post
#2
|
||
I have bees in my epiglotis ![]() ![]() ![]() ![]() Group: Members Posts: 2,196 Joined: 7-February 03 From: Kennewick Man (E. WA State) Member No.: 266 ![]() |
Actually, if you run the tranny upside-down the weight is moved higher - however, the output shafts are higher too, which can be a good thing on a car that has been lowered a lot. In fact, the factory ran the 915 upside down in the 935 turbo for just that reason. They also relocated the vent, used an external cooler, and added a pump for lubrication. -Ben M. |
||