Tony's Subaru Conversion Thread Options

[TonyAKAVW]

Well, I figured since there has been some pickup in momentum on this project that I would start a thread on my progress. Not to mention its a good way to share whatever ideas I pick up along the way.

The project started in January 2003 when I picked up the silver roller pictured below. Its a '74 and was pretty much stripped. It had a suspension and a few other parts but was missing a lot of major things like and engine, transmission, glass, hoods, gas tank, interior, wheels, etc. etc.

The story of my acquisition of this roller is in this thread:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=7991&hl=

After arriving at home:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=8963&hl=

This project got a bit of a slow start. I had to first part and chop up my first 914 and dispose of it. It was badly rusted and where itwasn't rusted it was bondo'd. This was going to be a replacement body for that car.

Then last summer I picked up the yellow '70 roller that is now my daily driver. Since then I've spent most of my 914 time fixing it up and getting it ready for WCC. Now that its in a pretty much stable state and WCC is over I can concentrate on this car.

The current plan is that it will get a Subaru 2.5L naturally aspirated engine in a conversion very similar to Scott Thacher's. The basic timeline is like this:

1. Fix up the body enough to make it roadworthy.
2. Put together the drivetrain (engine, adapter, transmission)
3. Install drivetrain and remaining parts
4. Install an exhaust system and wire up the engine, make it ready to drive
5. Install enough interior to drive it.
6. Drive it around a bit, fix whatever things don't work right
7. Flare the fenders (GT flares)
8. body and paint
9. Finish the interior
10.Performance mods - cams, etc.

I'm hoping that I get it at least roadworthy within a year, and the rest of the stuff within a year after that. Its possible I could get it done faster but we'll see. This is a big project.

Here's the car as it was when I brought it home:

[TonyAKAVW]

The motor came with the ECU, wiring harness, and a bunch of other stuff. Its currently with Jeff up in Mountain View but will be coming down in June thanks to Jenny's kind offer to bring it down with her on a trip to Long Beach.

Its a 2001 2.5RS motor, puts out 165 HP stock and has 41,000 miles on it. Turns out that the previous owner of the engine had bought the engine from a wrecked 2.5RS. The really wierd part is that the wrecked 2.5RS belong to Jeff's roommate. So the engine started in a car in Jeff's garage, got wrecked, was sold to a guy in San Francisco, and then came back to its original garage. I wonder if this engine is cursed. Maybe its like the tape in the movie The Ring.

I'm working now on getting an engine adapter plate and flywheel to get the drivetrain put together. I have a good transmission that I bought from Glenn of D&G a while back.

-Tony