Tony's Subaru Conversion Thread Options

[TonyAKAVW]

Well, I figured since there has been some pickup in momentum on this project that I would start a thread on my progress. Not to mention its a good way to share whatever ideas I pick up along the way.

The project started in January 2003 when I picked up the silver roller pictured below. Its a '74 and was pretty much stripped. It had a suspension and a few other parts but was missing a lot of major things like and engine, transmission, glass, hoods, gas tank, interior, wheels, etc. etc.

The story of my acquisition of this roller is in this thread:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=7991&hl=

After arriving at home:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=8963&hl=

This project got a bit of a slow start. I had to first part and chop up my first 914 and dispose of it. It was badly rusted and where itwasn't rusted it was bondo'd. This was going to be a replacement body for that car.

Then last summer I picked up the yellow '70 roller that is now my daily driver. Since then I've spent most of my 914 time fixing it up and getting it ready for WCC. Now that its in a pretty much stable state and WCC is over I can concentrate on this car.

The current plan is that it will get a Subaru 2.5L naturally aspirated engine in a conversion very similar to Scott Thacher's. The basic timeline is like this:

1. Fix up the body enough to make it roadworthy.
2. Put together the drivetrain (engine, adapter, transmission)
3. Install drivetrain and remaining parts
4. Install an exhaust system and wire up the engine, make it ready to drive
5. Install enough interior to drive it.
6. Drive it around a bit, fix whatever things don't work right
7. Flare the fenders (GT flares)
8. body and paint
9. Finish the interior
10.Performance mods - cams, etc.

I'm hoping that I get it at least roadworthy within a year, and the rest of the stuff within a year after that. Its possible I could get it done faster but we'll see. This is a big project.

Here's the car as it was when I brought it home:

[lapuwali]

QUOTE (Scott Carlberg @ May 19 2005, 01:32 PM)

QUOTE (AndyC @ May 19 2005, 12:58 PM) Another scooby doo conversion, I have a friend who works for a company called Prodrive building Subaru WRC rally cars here in the UK so if you need some very expensive performace parts let me know. He is still trying to convince me to scooby mine, his last argument was 500bhp from a £500 engine  :confused: Prodrive, that's cool! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) Same company that ran the Ferrari 550's & now the Aston Martin's in the ALMS/IMSA series.

Believe me, the WRC stuff is WAY cooler...

Prodrive doesn't just build ANY Soob WRC cars, they build the FACTORY WRC cars, and have won several World Championships. One of their drivers is running second in points right now.

If any parts could be obtained from that place, they'd be the best available. I'd love to know the recipes they used to build engines even 5 years ago. 300hp/500ft lbs 2.0 turbos with wide, smooth powerbands, which could easily make 500hp if you removed the required intake restrictor. You'd be able to break 901s at a dizzying pace. (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif)