Tony's Subaru Conversion Thread Options

[TonyAKAVW]

Well, I figured since there has been some pickup in momentum on this project that I would start a thread on my progress. Not to mention its a good way to share whatever ideas I pick up along the way.

The project started in January 2003 when I picked up the silver roller pictured below. Its a '74 and was pretty much stripped. It had a suspension and a few other parts but was missing a lot of major things like and engine, transmission, glass, hoods, gas tank, interior, wheels, etc. etc.

The story of my acquisition of this roller is in this thread:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=7991&hl=

After arriving at home:

http://www.914world.com/bbs2/index.php?act=...&f=2&t=8963&hl=

This project got a bit of a slow start. I had to first part and chop up my first 914 and dispose of it. It was badly rusted and where itwasn't rusted it was bondo'd. This was going to be a replacement body for that car.

Then last summer I picked up the yellow '70 roller that is now my daily driver. Since then I've spent most of my 914 time fixing it up and getting it ready for WCC. Now that its in a pretty much stable state and WCC is over I can concentrate on this car.

The current plan is that it will get a Subaru 2.5L naturally aspirated engine in a conversion very similar to Scott Thacher's. The basic timeline is like this:

1. Fix up the body enough to make it roadworthy.
2. Put together the drivetrain (engine, adapter, transmission)
3. Install drivetrain and remaining parts
4. Install an exhaust system and wire up the engine, make it ready to drive
5. Install enough interior to drive it.
6. Drive it around a bit, fix whatever things don't work right
7. Flare the fenders (GT flares)
8. body and paint
9. Finish the interior
10.Performance mods - cams, etc.

I'm hoping that I get it at least roadworthy within a year, and the rest of the stuff within a year after that. Its possible I could get it done faster but we'll see. This is a big project.

Here's the car as it was when I brought it home:

[scotty914]

9144guy, i will tell ya the suby 2.5 moves out quite well.

at the wcc tony was talking with me about going turbo, it would be faster but the cooling might not work with the radiator in the engine bay. after tony got a ride in my car he decided that thou the turbo would be nice the car is plenty fast enough with out it.

tony as for the engine bay clean up what you did is perfect, the engine will fit very well. before you go any further i would recommend getting the wiring harness, fuel, and brake lines secured or set up to be. the reason i say this is the next thing you will have to work on after por 15 will be motor mounts and radiator frame. as a matter of fact you might want to start on the mount now so when you por the engine bay you can por the new mwtal as well.

edit: tony you could remove the stock motor mounts but they are really really well attached line 50 spot welds per mount

one thing i can say is i am jealous of tony, he does not need to guess as much as i did (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif)