Looking for someone with Fiber Glass experience, in SF Bay area Options

[MikeP]

I'm getting my V8 car a 930 installed at Bauer Porsche in Oakland, and while it is there I'm doing the 5 lug conversion and new wheels. This means two things:

1. My fenders need cut/flared for the new wheels before the car can leave the shop. The shop is amenable to an independent party doing this there but has not found someone yet.

2. My custom offset Panasport ultralight wheels with rubber (225, 50, 15) the biggest you can fit under a stock fender will be available.

I am looking for someone with fiberglass experience who I could either pay to bond the FG flares or who might be interested in a trade for the Panasports or a refferral to an independant person who might be interested in the job or any combination thereof. As a trade for the Panasports I'd want a pretty complete job done, as I really just need the flares bonded/ the rough fg work done. Any help is greatly appreciated. Not the best picture I know, but you get the idea.

[Mueller]

QUOTE (rogergrubb @ Jul 27 2005, 01:31 PM)

those panasports arent even close to being a fair trade for that amount of Fg work. Just an FYI. I do a little FG work but it's such a pain in the arse that I keep it to a minimum and only my stuff.

I wouldn't go that far...the Panasports are worth about $800 plus or minus a few hundred depending on offset....

As for the fenders, I'd say 3 hours per fender