Project 914-LT1 Canadian V8 conversion, Getting Started with Engine Build-up Options

[ajracer]

Greetings Fellow teeners !

Now that the COLD weather has arrived with - 5 F temperatures and the snow has
just hit Toronto hard, so I thought it would be a good time to post a new thread and
share my excitement with getting started with my V-8 conversion and build-up of the
vehicle. Let’s say I am not new to automotive, but have been in hibernation for over
twenty years. Porsche's are new to me; but German engineering is not since I used
to race formula vee (VW powered) many years ago in Atlantic Canada.

I should also mention that I am not a mechanic or ever received any "formal" training
in mechanics, but I have been around karts, motorcycles, hot rods and race cars for
more years than my 31 yr. old teener. I have build up a few Chevy small blocks and
always had good success, never any problems with good old faithful since they are
a strong and reliable engine made in the US of A, or Canada of course ! I have more
recently spent two years restoring and a complete build up of 1972 Super Beetle for
my beloved daughter. So I have been rehoning my skills in bodywork, welding, painting,
engine building, mechanics, etc. Now after acquiring a very nice Porsche 914 from
Florida that belonged to a deceased family friend, I thought this would be a good time
to bring the teener to my garage and begin this challenging CONVERSION. See for me I
get the Best of Both Worlds with a P-car and a Chevy engine ! What more could a guy
want ?

Anyways I should start my thread discussion and info for others than might be interested.
Like every conversion we all have different ideas of what we want, how
we thing it should be done, what we "think" might need to be replaced, upgraded,
purchased or re done with modern or better materials and or technology ! I will share
more about this as time progresses and my thread grows; like others some things will
follow the "suggested" course taken by most within the V-8 conversion scene; But
other things and ways will be unique or different, for many reasons and maybe just
because that's the way I think is best in my eyes.

So off I go with the basic info and some of the reasons I got here. The 914 is in very
good condition according to my inspection and the key areas as suggested by the
knowledgeable ones. The car is a 1974 former 2.0 liter with a custom added roll bar
setup, which when I last looked tied into the rear suspension and side longitudinals.
The car is complete and together except for the Engine and Transmission; the purchase
also included Rod Simpson Conversion Kit with many parts, installation manual, parts
supplier list, etc; also included were a couple sets of HD rear springs, fiberglass GT
flares and rocker panels. Pictures of the car will follow after I complete the engine
build-up, then I will bring my baby in out of the cold for some tender loving care (and
a photo session) The body does require some minor body work and paint, but that
will likely not follow until the conversion is completed and car is sorted out and driving.
A good project for next winter being the bodywork.

Engine is going to be a Chevy Camaro LT1 (1995) 350 cu.in. with aluminum heads, and
other light weight components. The engine was dismantled before Christmas and sent
off to the automotive machine shop for necessary work I required, while I purchased
the new rebuild parts from my supplier friend in Halifax, NS. (wholesale purchase of
course) Got the engine pieces all back from the machine shop about two weeks ago
and thus have slowly started the rebuild assembly process. According to my engine
guy, with a little work on the heads, pistons, etc. it should make about 375 HP with 350
ft.lbs of torque. Hopefully it will perform nicely in a 2400 lbs. Porsche ! Check out the
attached photo of partially completed short block with yours truly !

Until next time have a great day and keep to those New Year’s Resolutions !
Quit drinking, Quit smoking, Quit speeding, etc !!!!! Forget it who am I kidding !


PS. What does a 914 drive like with 375 HP ? I don’t even know what a 914 drives
like since I have never honestly even been in one, before I bought mine (sight unseen)
Someone said something about it handles like a dream, and great G-force if you have
the guts to push and hang on tight !

[ajracer]

Puppy is RUNNING !!!

Since I never really finished the vehicle to drive it to the "Canadian Por Volks Festival
" hosted by Mark's Airt Cooled; I decided to at least get it mobile and trailered to he show.

Since this is a "work in progress - project car" I thought it would be a great idea.
Even brought along some tools, supplies, etc to complete a few last minute minor
details to "Fire-up" at the show. Was not able to keep my appointment yesterday
to have the mufflers installed, but hey open header still sound GOOD to me!
So after taking deliver of the roller last summer, I decided after a year it would be
a good idea to at least wash the dirty car which spent the last twelve months in
garage(s) was on jack stand. Only yesterday did I get to install the 944 turbo axles,
added water this mornring. Like any conversion project there are problems or the
unexpected and the teener was no exception. After connecting the electric fuel
pump wires found no power and had to build a last minute harness and a few minor
items before fire up. She picked up the fuel so quickly I think I might have even
flooded the engine. But no start; so backwards we go checking items and found a
couple problems which were corrected.

Turn the key and she sputters a few times, relocate all the plug wires one position
on the distributor cap and try again THIS time she takes right off and within
seconds (with open headers) a few bystanders decided to check out this loud noise
and wonder what kind of vehicle it this ??

Attached photo of the nice (but not so pretty teener) on her way after boarding
the trailer. More info to follow soon, still need to add mufflers and adjust up the
clutch linkage. Driving it seems like a reality this week !!!!!!


Allan