Project 914-LT1 Canadian V8 conversion, Getting Started with Engine Build-up Options

[ajracer]

Greetings Fellow teeners !

Now that the COLD weather has arrived with - 5 F temperatures and the snow has
just hit Toronto hard, so I thought it would be a good time to post a new thread and
share my excitement with getting started with my V-8 conversion and build-up of the
vehicle. Let’s say I am not new to automotive, but have been in hibernation for over
twenty years. Porsche's are new to me; but German engineering is not since I used
to race formula vee (VW powered) many years ago in Atlantic Canada.

I should also mention that I am not a mechanic or ever received any "formal" training
in mechanics, but I have been around karts, motorcycles, hot rods and race cars for
more years than my 31 yr. old teener. I have build up a few Chevy small blocks and
always had good success, never any problems with good old faithful since they are
a strong and reliable engine made in the US of A, or Canada of course ! I have more
recently spent two years restoring and a complete build up of 1972 Super Beetle for
my beloved daughter. So I have been rehoning my skills in bodywork, welding, painting,
engine building, mechanics, etc. Now after acquiring a very nice Porsche 914 from
Florida that belonged to a deceased family friend, I thought this would be a good time
to bring the teener to my garage and begin this challenging CONVERSION. See for me I
get the Best of Both Worlds with a P-car and a Chevy engine ! What more could a guy
want ?

Anyways I should start my thread discussion and info for others than might be interested.
Like every conversion we all have different ideas of what we want, how
we thing it should be done, what we "think" might need to be replaced, upgraded,
purchased or re done with modern or better materials and or technology ! I will share
more about this as time progresses and my thread grows; like others some things will
follow the "suggested" course taken by most within the V-8 conversion scene; But
other things and ways will be unique or different, for many reasons and maybe just
because that's the way I think is best in my eyes.

So off I go with the basic info and some of the reasons I got here. The 914 is in very
good condition according to my inspection and the key areas as suggested by the
knowledgeable ones. The car is a 1974 former 2.0 liter with a custom added roll bar
setup, which when I last looked tied into the rear suspension and side longitudinals.
The car is complete and together except for the Engine and Transmission; the purchase
also included Rod Simpson Conversion Kit with many parts, installation manual, parts
supplier list, etc; also included were a couple sets of HD rear springs, fiberglass GT
flares and rocker panels. Pictures of the car will follow after I complete the engine
build-up, then I will bring my baby in out of the cold for some tender loving care (and
a photo session) The body does require some minor body work and paint, but that
will likely not follow until the conversion is completed and car is sorted out and driving.
A good project for next winter being the bodywork.

Engine is going to be a Chevy Camaro LT1 (1995) 350 cu.in. with aluminum heads, and
other light weight components. The engine was dismantled before Christmas and sent
off to the automotive machine shop for necessary work I required, while I purchased
the new rebuild parts from my supplier friend in Halifax, NS. (wholesale purchase of
course) Got the engine pieces all back from the machine shop about two weeks ago
and thus have slowly started the rebuild assembly process. According to my engine
guy, with a little work on the heads, pistons, etc. it should make about 375 HP with 350
ft.lbs of torque. Hopefully it will perform nicely in a 2400 lbs. Porsche ! Check out the
attached photo of partially completed short block with yours truly !

Until next time have a great day and keep to those New Year’s Resolutions !
Quit drinking, Quit smoking, Quit speeding, etc !!!!! Forget it who am I kidding !


PS. What does a 914 drive like with 375 HP ? I don’t even know what a 914 drives
like since I have never honestly even been in one, before I bought mine (sight unseen)
Someone said something about it handles like a dream, and great G-force if you have
the guts to push and hang on tight !

[ajracer]

Greetings Teener Friends:

I am in the process of packing and moving uptown; and a little busy to say
the least right now with many things. Also in the heading out of town for a
few weeks to Asia on a family trip. Upon my return I would be more than pleased
to answer everyones question's, comments and or interest in components.

In the meantime I will try to provide brief info as follows:

Bigkat 83 - Yes they are ROH wheels both 17" (a rough set mainly for mock up
and sorting out the conversion until $$ to buy a decent set of P rims.
Tire sizes if I remeber correctly are 205/50/17 fronts & 255/50/17 rear
(rears are a little "tall" but worth trying for a V8 and thus taller gears.

Neo 914 - I will need to check the cost on these items but the big one was my
custom flywheel design. The adapter plate was not that complex and
would likely be quite reasonable.


Mueller/Neo914 - I will try to clarify; I purchased new 944 turbo axles and had a
local racer give me different length 944 axles which mated up to the
Boxster tranny six bolt flange and my 944 stub axles (with spacer)
and early 911 hubs. (I think that's how it went together) The C/V were
from 1987+ model year 944Turbo. Like I said I have the specifics
in my conversion documents but unable to check for a couple of weeks.

Hope that helps for now.

Allan