Rebuilding my race car, multi link rear suspension, fg gt flairs Options

[slugmika]

I had to make it public. That's the only way i'am going to get anything done.
So, i had to convert my rear suspension to multi link, raise the front suspension, built a new pedalbox, rebuilt the engine and tranny, make attachemets for new fg flared rear and front fenders, make a new carbon top, glue the new heated windshield, paint the car and lots of other stuff.

I will post pictures when ever i have any progress.

Here is the starting point
(IMG:http://www.914world.com/bbs2/uploads_offsite/fvwa.sitefactory.fi-179-1274375877.1.JPG)
hub's are attached to table

(IMG:http://www.914world.com/bbs2/uploads_offsite/fvwa.sitefactory.fi-179-1274375881.2.jpg)
lower part of the new front

i'll put more pictures later

[slugmika]

Aaron- next will be the upper mount's, i will make those in a place of that wood stick. For now i will fabricate a frame which is welded to my chassis table. when all is done and check measured, i will lift the body over completed suspension and weld it to my gage and tub.
Yes those are bus cv's and bus axles with adapters, works really well.
Headrage-I'am sure you can help. When they get the parts to Compton in a box which has my name and address, rest is easy. Many times when i have tried to buy something it seems to be problem to sendt those directly to Finland or even to Compton.
Dan-If you look closely it is a side shifter tranny. I broke all my side shifter end covers so i had to use one from tail shifter. So i could use side shifter end piece if you guys have spare ones.
Fabricating is easy part of this project, it is the planning that has took my time. And yes Dan my carage is heated. It is insulated as a normal house in Finland and has floor heating and infra red heaters for paintin.
I will try to finish the upper mount today and take some pictures.

Mika