Replica 914-6 GT Double Grilled Engine Lid Options

[PCA7GGR]

FS: 914-6 GT Double Engine Grill
Replica of the original double grilled 914-6GT engine lid. It is made with original grill material. The cross brace can be lighten or removed (your choice - the lid is a bit more structurally rigid if the cross brace is only lightened - with the cross brace removed, the lid is lighter but the lid tends to flex and may not fit flush against the trunk when closed). The latch and torsion bars are left intact. The lids are painted semi-gloss black (similar to satin black).

The lid is $500 with a core lid (or $550 without a core) plus shipping/packing - cash, cashiers check or Paypal (add 3% for Paypal) from you. Your core lid(s)/grill(s) needs to be in very nice condition (lid has minimal coats of paint, no dents, nor rust and the mesh on grill has no holes nor deformities). If you are providing a stock lid(s)/grill(s), you are responsible for their packing/shipping to me. You can use the box that I send your GT lid in and, upon receipt and if in usable condition, I will refund $50.

More pics and info available upon request, Thanks

Sergio
(sgmeza-at-sbcglobal.net)

[Aaron Cox]

I am asking about the pieces to the right and left of the grill up against the glass and alonside the pillar . I'll take a picture later.

those arent removeable... theyre part of the body.

afik... the GT cars had the double griller, AND that solid area which you speak of jim. just the lids was changed