Adding dog-ear reinforcement, Really going into details. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Adding dog-ear reinforcement, Really going into details. |
michel richard |
Mar 12 2006, 04:17 PM
Post
#1
|
Senior Member Group: Members Posts: 1,291 Joined: 22-July 03 From: Longueuil, Québec Member No.: 936 |
On my /6 project, I have decided not to add the tub reinforcements on the inside rear wheel well, for a variety of reasons. I did decide that I wanted the dog-ear reinforcement, also for a variety of reasons.
I am building the whole thing from scratch and I will post a detailed picture sequence in the hope that some will find it interesting. I first bought some cold-rolled flat stock, 1/4 inch by 1.5 inch. I will say that I did not try to calculate if this resulted in a tang of the right strength, but it's what I used. There's 8 tangs required, 6 the same and 2 a little longer. To make the tangs, I began by drilling a 3/8 inch hole: Attached image(s) |
bondo |
Mar 17 2006, 12:17 PM
Post
#2
|
Practicing my perpendicular parking Group: Members Posts: 4,277 Joined: 19-April 03 From: Los Osos, CA Member No.: 587 Region Association: Central California |
Sweet! Seeing things like this have the potential to keep my 914 from ever getting finished. Somebody please convince me that there's no reason to do this on a street V8 914.. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|