 Rebuilding the FI relay board. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Air_Cooled_Nut |
 Sep 15 2003, 04:22 PM
Post
#1
|
|
914 Ronin - 914 owner who lost his 914club.com  Group: Members Posts: 1,748 Joined: 19-April 03 From: Beaverton, Oregon Member No.: 584 Region Association: None  |
My soldering skills leave something to be desired and the space in which to perform the soldering is rather tight but I was able to do it...I think...at least it looked okay and felt solid. Here's a picture of before my soldering and after it was all coated:
(IMG:http://www.914world.com/bbs2/uploads/post-2-1063733351.jpg) Mine showed only a couple cracks in the tar bottom and I'm sure I could've easily patched them but I wanted to see if recoating was easy. It is, just messy and I recommend wearing nitrile or latex gloves. The LET shrinks considerably. One container will be more than enough for two coats and left overs for later wiring projects. The 3M undercoating sprayed on easily and did not shrink. Several coats of that would probably be fine. I hesitated using RTV because I thought I read somewhere that it may be slightly acidic on some metals and I didn't want to risk having my copper strips and soldered joints disappearing on me one day while driving. If anyone else has done this differently I would like to hear about it, be is successful or not. Mine was successful (short term at least (IMG:style_emoticons/default/wink.gif) ) as the car started right up and ran after installation. Will it last for the years to come? We'll certainly find out (IMG:style_emoticons/default/beerchug.gif) |
   |
 
|
  |
Replies
| dan10101 |
Sep 15 2003, 10:11 PM
Post
#2
|
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
We need to do one of these boards. At least that's what the diags say. Do you solder all the terminals? Will a 15watt gun do the trick? Do you just stick in on the rivet and get it hot then stick some solder to it? Inquiring minds... yada yada...
The one I stripped looks like this one, just a few solders here and there maybe 4 total. Andrew drove his car to school today.... (IMG:style_emoticons/default/cool.gif) Oh, he was cool... (IMG:style_emoticons/default/cool_shades.gif) |
|
|
|
Posts in this topic
Air_Cooled_Nut Rebuilding the FI relay board. Sep 15 2003, 04:22 PM
Air_Cooled_Nut It's working for me...here's the URL I use... Sep 15 2003, 04:38 PM brant Wow... looks great.
does anybody know if common g... Sep 15 2003, 05:07 PM TonyAKAVW Has anyone ever thought of building a modern versi... Sep 15 2003, 06:15 PM Aaron Cox i potted mine with rtv silicone. good stuff. Sep 15 2003, 09:48 PM jkeyzer I used Silicone Conformal Coating. It's very ... Sep 15 2003, 09:53 PM Air_Cooled_Nut I have an old soldering pencil. Couldn't tell... Sep 15 2003, 10:31 PM Korijo I would like to have mine done like this... Where ... Sep 15 2003, 10:56 PM jkeyzer A higher wattage iron with a decent tip helps a lo... Sep 15 2003, 11:16 PM ThinAir914 Where can one get Silicone Conformal Coating or LE... Sep 15 2003, 11:29 PM Air_Cooled_Nut The chemicals are readily available at any decent ... Sep 16 2003, 12:04 AM dan10101 Thanks for the suggestions. I'll try again to... Sep 16 2003, 12:10 AM Korijo So where would I go to have this done ?? Sep 16 2003, 12:56 AM Air_Cooled_Nut Do it yourself! ;) Sep 16 2003, 10:51 AM Brad Roberts Thank for the thread Toby.. it will go into the cl... Sep 16 2003, 11:27 AM Air_Cooled_Nut Here's the image as an attachment: Sep 16 2003, 11:29 AM seanery Dude,
Dave has ALS, I don't think he can do i... Sep 16 2003, 01:27 PM Air_Cooled_Nut Sorry, didn't know and what is "ALS"?
If nobo... Sep 16 2003, 02:01 PM seanery it's commonly known as Lou Gherig's diseas... Sep 16 2003, 02:02 PM
Air_Cooled_Nut Ah...gotcha!
Hey, my sister's name is Kor... Sep 16 2003, 02:08 PM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th December 2024 - 06:45 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.