Has any one modified the pedal cluster?, Via making a longer clutch lever arm? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Has any one modified the pedal cluster?, Via making a longer clutch lever arm? |
wbergtho |
Apr 1 2006, 01:45 PM
Post
#1
|
Senior Member Group: Members Posts: 1,314 Joined: 28-April 03 From: Roberts, WI Member No.: 623 |
I am not getting all the travel I need to fully actuate my clutch...so I decided to modify the lever arm down at the pedal cluster. I added a tab above the original hole and have made effectively a two hole lever arm. The stock hole is retained...and the new hole is about 3/4" above it to allow more travel/throw. I have a KEP stage 1 pressure plate and it requires more travel to actuate. By making the lever arm longer...a much stronger force is transmitted into the clutch shaft in the pedal box. I have found that the roll pin hole on the clutch shaft gets ovaled and the shaft itself becomes distorted when applying this King Kong force to it. As it is made only of mild steel, I have decided to repair the distorted/ ovaled end and weld it all up and grind round again. Next step...weld the fricken clutch pedal casting to the pedal box clutch shaft...hopefully eliminating the distortion damage under load. NO MORE ROLL PIN. (carry an extra cable every where I go...I know) (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) I'll report back later and let you know how it worked. If I made things worse and a new pedal cluster is necessary...it won't be the end of the world. (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif)
ANYONE EVER RESORT TO SUCH TACTICS? (IMG:http://www.914world.com/bbs2/html/emoticons/welder.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/sawzall-smiley.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/WTF.gif) Bill |
neo914-6 |
Apr 2 2006, 01:03 PM
Post
#2
|
||
neo life Group: Members Posts: 5,086 Joined: 16-January 03 From: Willow Glen (San Jose) Member No.: 159 |
Rich's was made by H&H?:
|
||
Lo-Fi Version | Time is now: 21st September 2024 - 07:06 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |