 911 SC struts on '74 914, I have a few questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| germaneighter |
 May 25 2006, 10:01 PM
Post
#1
|
|
Member  Group: Members Posts: 130 Joined: 9-August 05 From: Tulsa, OK Member No.: 4,563  |
I am installing a set of SC struts on my '74. (Bilsteins) I have a few questions and/or comments that I need some answers/feedback on:
1.) I noticed the SC top strut mount has different bolt spacings than the stock 914. It will mount up to the 914 strut tower but I can not match my marks from where the original support plates were. Will it work as is? Will my allignment adjustment limits be reduced? Do I need to swap the strut mounts? 2.) The strut stud on the right side sticks up about 1". It is near flush to the nut on the left side. What causes this? Is it cause for concern? It looks close to hitting the hood! 3.) It appears I will need to use 911 brake hoses in order to use the SC hose clip. Should I use an SC brake hose? Will the end that mounts to the body match the 914 clip? 4.) I had a hard time getting one of the tapered studs that hold the strut to the ball joint torqued to spec. Should these be replaced every time? Any help would be greatly appreciated. dave |
   |
 
|
  |
Replies
| SLITS |
May 26 2006, 06:53 AM
Post
#2
|
|
"This Utah shit is HARSH!" Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None  |
QUOTE(germaneighter @ May 25 2006, 09:01 PM)  I am installing a set of SC struts on my '74. (Bilsteins) I have a few questions and/or comments that I need some answers/feedback on: 1.) I noticed the SC top strut mount has different bolt spacings than the stock 914. It will mount up to the 914 strut tower but I can not match my marks from where the original support plates were. Will it work as is? Will my allignment adjustment limits be reduced? Do I need to swap the strut mounts?You should have left the plates on. That way the alignment is not disturbed 2.) The strut stud on the right side sticks up about 1". It is near flush to the nut on the left side. What causes this? Is it cause for concern? It looks close to hitting the hood!As moroni-boy said, "there is a 1/2" spacer that sits on top of the upper strut cover". 3.) It appears I will need to use 911 brake hoses in order to use the SC hose clip. Should I use an SC brake hose? Will the end that mounts to the body match the 914 clip?I bought a set of SS...fronts are 911...rears are 914.....Sorry, Cap'n 4.) I had a hard time getting one of the tapered studs that hold the strut to the ball joint torqued to spec. Should these be replaced every time?If it wasn't coming to torque spec, I would inspect it for pulling the threads (threaded portion ready to break off Any help would be greatly appreciated. dave I just did this last weekend...completed a 5 lug coversion, but I used a complete SC front end...Yeh, I like the idea of the underbody swaybar. |
|
|
|
Posts in this topic
germaneighter 911 SC struts on '74 914 May 25 2006, 10:01 PM
Aaron Cox brake lines. you need to use a 914 line, but make ... May 25 2006, 10:17 PM Eric_Shea QUOTE
SLITS |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th June 2024 - 04:19 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |