Is this really a 915 Transaxle... Options

[quadracerx]

Hi...

Is this really a 915 transaxle....Wanna get one for a V8 Conversion....not sure how to identify one and tell the difference between a 915 and the 901 that comes in these cars....?

[wbergtho]

915 is not well suited to V8's due to gearing and, when you consider the expense of regearing, etc., it's almost cheaper to go with a 930 box which, after all is said and done, will still run you $6-$10K.

If you are going to do a high hp 350 type and you want to drive it aggressively, you will have no choice as the 901 will not stand up to that kind of torque.

If you stay with a 327, 302 or 283, the 901 will work just fine, especially if you do NOT use 1st and, if you do a fair amount of highway driving, you do an H gear swap.

You might consider getting my book ... available in the resource section for $60, it will save you a LOT of time, money and grief.

Good luck ... Ed

All true...I blew the 2nd gear right off the pinion shaft on my first 915 (on a high hp V-8 car)...then I upgraded to a 930 box.