Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> OT~ Mobile Office project, OR my new home down by the river
lotus_65
post Feb 23 2007, 09:11 AM
Post #1


Senior Member
***

Group: Members
Posts: 1,608
Joined: 21-March 05
From: minneapolis, mn
Member No.: 3,795
Region Association: Northstar Region



I have never started a business, but I have invested a lot of time and effort into an idea I had and I'm moving towards getting some startup funds in the 100 grand range. I think it's a ton of coin, but I have also begun securing a conditional business method patent, so I think the idea is strong.
It has to do with photography and marketing in a mobile setting. That's where you guys come in. I have 3 issues, and anyone can offer their constructive feedback and I'll appreciate it.

TOPIC 1~ A VAN
Attached Image

I like the Dodge/Mercedes Sprinter and it will be converted with these features:
  1. 110 power inverter and wiring for electronics such as my Mac and large monitor among other items.
  2. A soundproof (as much as possible) section in the rear as an audio sound studio.
  3. Desks and cabinets for electronics.
  4. Exterior scene lighting.
  5. Rear AC/heat
It'll also have custom exterior graphics and a couple other goodies.

I'm not handy enough to tackle it, but the cost will be huge to have it commercially converted!
p.s. if this business doesn't fly, this is what I'll be living in down by that river i mentioned before!

TOPIC 2~ Custom circuit board for LED signs
It seems simple to me for someone who knows what there doing, but I'm probably wrong, because I don't know what I'm doing.
They'd be 12-volt super-bright LED, solar rechargeable and edge-lit acrylic. Anyone with experience here who wants to offer design advice or would like to help me with a mockup I could really use it. I have a sketch and parameters laid out, these parts would be eventually manufactured in China.

TOPIC 3~ Market research

If anyone is a subscriber to e-marketer or a similar service... REALLY expensive, and I just need background info on some specific trends. It'll take me months to compile data at the law library that these people have already done a great job acquiring.

This is a big project, and a lot to ask you guys, but compensation of some kind will be available, so speak up if you want to!

Thanks,
Paul
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
GeorgeRud
post Feb 23 2007, 06:08 PM
Post #2


Advanced Member
****

Group: Members
Posts: 3,725
Joined: 27-July 05
From: Chicagoland
Member No.: 4,482
Region Association: Upper MidWest



Most of the stuff you're looking at is available in the RV market. I'm in the process of redoing a 1975 GMC motorhome to make a race weekend couch for my friends and family, and have found all sorts of parts available. Most of this is obviously a do it yourself project in my case, but there are custom RV builders that can do this sort of work easily. Unfortunately, like any custom project, bring $$$.

To get enough electricity for any length of time, you will also need a generator to keep the batteries charged as well as an inverter. Add up all your electrical uses (how many amps they each will draw), and you can get an idea of the power required. Heat usually requires a propane powered furnace, also from the RV industry.

There are also companies that are looking into using the Sprinter as a portable office for execs - more room and capabilities than your usual stretch limo. I'm sure you could get some info from them as well.

Good Luck on your project!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 27th December 2024 - 01:38 PM