 Wheels and Tires, Let's get this discussion centralized |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
Model Specific Information
914/4: 70 71 72 73 74 75 76 914/6: 70 71 72
| Pat Garvey |
 Apr 3 2007, 08:16 PM
Post
#1
|
|
Do I or don't I...........?  Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States  |
It ocurs to me that we've forgotten the various combination of wheel offered by the factory for 914's.
I see to recollect (VERY dangerous) that there were: Steel - four versions (maybe 5) Alloy - five versions I know there were different widths available in some, but I'm talking about design. I'll start - these are 5 1/2J steel wheels from an early car with appearance group. Yes, they've been rstored & no, they do not have the proper flat black center spray around the lugs. Pat Attached image(s) 
|
   |
 
|
  |
Replies
| Jasfsmith |
Apr 4 2007, 09:07 AM
Post
#2
|
|
Senior Member Group: Members Posts: 556 Joined: 4-October 04 From: Bangor, ME Member No.: 2,882 Region Association: North East States  |
5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970.
And what they look like on the car. BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly. Attached image(s)  
|
|
|
|
| Pat Garvey |
 Apr 4 2007, 07:59 PM
Post
#3
|
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
QUOTE(Jasfsmith @ Apr 4 2007, 09:07 AM)  5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970. And what they look like on the car. BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly. Are you getting them from Cocker? Happy to hear from you & hope you're better!!! Pat |
|
|
|
Posts in this topic
Pat Garvey Wheels and Tires Apr 3 2007, 08:16 PM
Jasfsmith
5 1/2" x 15" 10-spoke MAHLE "gasb... Apr 6 2007, 09:05 AM Pat Garvey
[quote name='Pat Garvey' post='884201' date='Apr ... Apr 6 2007, 08:11 PM Jasfsmith
No deals, straight $191 per tire plus ... Apr 8 2007, 09:48 AM
1970 Neun vierzehn An early 5.5 x 15 Pedrinni Apr 4 2007, 01:19 PM 1970 Neun vierzehn Pat,
Iffen those be the jackstands you plan to us... Apr 4 2007, 01:49 PM Johny Blackstain
Pat,
Iffen those be the jackstands you plan to u... Apr 4 2007, 01:51 PM Pat Garvey
Pat,
Iffen those be the jackstands you plan to u... Apr 4 2007, 07:55 PM Johny Blackstain
[quote name='1970 Neun vierzehn' post='884071' da... Apr 5 2007, 01:52 PM Johny Blackstain 15"x5.5" 4 bolt Creamsicle Mahle.
:sha... Apr 4 2007, 02:13 PM Pat Garvey I' wichha Johnny!
Going shopping tomorrow... Apr 5 2007, 07:02 PM Pat Garvey What? No one has Fuchs alloys? Apr 6 2007, 08:12 PM Johny Blackstain
What? No one has Fuchs alloys?
I do but they... Apr 6 2007, 09:49 PM McMark http://www.914world.com/members/markd/misc/wheel/f... Apr 30 2007, 04:11 AM Pat Garvey Thanks McMark - burgers on me!
Finally a Fuch... Apr 30 2007, 07:27 PM McMark More wheels:
These are the fuchs that came on th... May 7 2007, 04:10 AM sendjonathanmail heres mine...
http://i133.photobucket.com/albums/... May 11 2007, 10:03 PM Dan (Almaden Valley) here are mine after hand polishing May 12 2007, 12:37 AM Pat Garvey
here are mine after hand polishing
Dan, those ar... May 12 2007, 08:25 PM robby750
here are mine after hand polishing
Dan, those a... May 17 2007, 10:18 PM nowlings In reference to the 4 bolt fuchs, I notice that in... Jun 21 2007, 05:31 PM 1970 Neun vierzehn :wttc:
The center caps used on 5 bolt Fuchs all... Jun 21 2007, 05:44 PM nowlings
:wttc:
The center caps used on 5 bolt Fuchs al... Jun 21 2007, 05:55 PM Pat Garvey
:wttc:
The center caps used on 5 bolt Fuchs a... Jun 21 2007, 06:01 PM nowlings
[quote name='nowlings' post='914315' date='Jun 21... Jun 21 2007, 06:12 PM Pat Garvey
[quote name='nowlings' post='914315' date='Jun 2... Jun 21 2007, 06:17 PM Pat Garvey Ok, we have several threads going that have been h... Aug 6 2007, 09:34 PM Jasfsmith
Ok, we have several threads going that have been ... Aug 7 2007, 12:52 PM Johny Blackstain If James is correct in his post above it would see... Aug 7 2007, 06:05 PM Jasfsmith
James, you are aware though that the Michelin XA... Aug 8 2007, 08:14 AM Jasfsmith
If James is correct in his post above it would se... Aug 8 2007, 08:41 AM Pat Garvey I'm awaiting additional responses. But, at th... Aug 7 2007, 08:06 PM Jasfsmith
I'm awaiting additional responses. But, at t... Aug 8 2007, 08:22 AM Johny Blackstain Pat- here is the link to the Kuhmos on The Tire Ra... Aug 7 2007, 08:12 PM Pat Garvey
Pat- here is the link to the Kuhmos on The Tire R... Aug 7 2007, 09:19 PM Johny Blackstain
Al,
Know what scares me? Two things:
1. Haven... Aug 7 2007, 09:33 PM Jasfsmith
3. Will they be accepted, regardless of proper ... Aug 8 2007, 08:55 AM Porsche Rescue I once put the Kuhmos on a 66 911 with stock 4.5... Aug 7 2007, 08:54 PM Jasfsmith
I once put the Kuhmos on a 66 911 with stock 4.5... Aug 8 2007, 08:29 AM Porsche Rescue One more time James: (my need is for a '69 912... Aug 8 2007, 10:01 AM Jasfsmith
One more time James: (my need is for a '69 91... Aug 8 2007, 01:38 PM Porsche Rescue '69 was 5.5 as was '68; 66 & 7 were 4.... Aug 8 2007, 01:56 PM Jasfsmith
I do use the car for local PCA tours and sometime... Aug 9 2007, 12:03 PM 1970 Neun vierzehn This whole business of perfectly sized, branded an... Aug 9 2007, 10:12 AM Jasfsmith
This whole business of perfectly sized, branded a... Aug 9 2007, 11:48 AM Porsche Rescue All very true and well said Paul.
On the "pri... Aug 9 2007, 10:42 AM Jasfsmith
All very true and well said Paul.
On the "pr... Aug 9 2007, 11:51 AM 1970 Neun vierzehn
My '70 914-4 came with 155SR15's on ste... Aug 9 2007, 12:27 PM Johny Blackstain I wonder if George can have a custom gas tank stic... Aug 9 2007, 01:25 PM Porsche Rescue James, are you saying that the 165HR Vredesteins w... Aug 10 2007, 02:31 PM Jasfsmith
James, are you saying that the 165HR Vredesteins ... Aug 11 2007, 02:51 PM Porsche Rescue My manual, in the technical data section, specifie... Aug 11 2007, 06:41 PM orthobiz Pat! I'm surprised at you. All those naile... Aug 13 2007, 04:49 PM Pat Garvey tsk, tsk, tsk!
A man in your position with a ... Aug 13 2007, 05:16 PM orthobiz Thanks, Pat, for the posting help.
So, is my spar... Aug 13 2007, 05:26 PM orthobiz Front and back of the 15" Steelies from 1974 ... Aug 13 2007, 05:32 PM Porsche Rescue Here I go again! Ortho's example is why I ... Aug 13 2007, 05:57 PM Jasfsmith
Here I go again! Ortho's example is why I... Aug 14 2007, 07:54 AM Porsche Rescue I'm sure you're right.
When I bought my ne... Aug 14 2007, 09:55 AM Jasfsmith
I'm sure you're right.
When I bought my n... Aug 14 2007, 02:14 PM 1970 Neun vierzehn
The chrome early style wheels were 5 1/2".... Aug 14 2007, 03:04 PM Jasfsmith
The chrome early style wheels were 5 1/2... Aug 15 2007, 08:59 AM Porsche Rescue Those are aftermarket wheels. The d... Aug 14 2007, 03:23 PM Pat Garvey
Those are aftermarket wheels. The ... Aug 14 2007, 08:04 PM Porsche Rescue
Above is the wheel in painted steel, except it i... Aug 14 2007, 08:23 PM orthobiz
Above is the wheel in painted steel, except it i... Aug 14 2007, 10:16 PM Pat Garvey
[quote name='Porsche Rescue' post='935056' date='... Aug 15 2007, 08:07 PM 1970 Neun vierzehn
Here's the wheel pic:
Paul
Centers - wit... Aug 23 2007, 01:45 PM Ferg Gint's car the zambeziteen had the 5.5 chromie... Aug 15 2007, 09:18 AM Porsche Rescue James, my '70 pictured above came from the sho... Aug 15 2007, 09:39 AM Jasfsmith
James, my '70 pictured above came from the sh... Aug 15 2007, 03:36 PM 1970 Neun vierzehn :deadhorse:
Incontrovertible proof of factory sp... Aug 23 2007, 01:41 PM anderssj Like this? Aug 25 2007, 09:49 PM Pat Garvey
Like this?
Yep.........course, if it's cover... Aug 26 2007, 09:48 AM sendjonathanmail spare
http://i133.photobucket.com/albums/q44/... Sep 9 2007, 02:57 PM davep I'm finally reading this thread.
One combo you... Sep 23 2007, 09:37 AM Pat Garvey
I'm finally reading this thread.
One combo yo... Sep 23 2007, 10:02 AM Porsche Rescue Will be stamped "5 1/2 J 15" on the outs... Sep 23 2007, 10:26 AM SirAndy
Also will have "ET 40" which is the off... Jan 16 2008, 04:12 PM davep Jim has it correct. The 'J' for tubeless w... Sep 23 2007, 12:47 PM Pat Garvey
Jim has it correct. The 'J' for tubeless ... Sep 23 2007, 07:59 PM 914pwer i had four of these on my 914-4 -71
it is remotec ... Dec 5 2007, 05:43 PM slackin' at work could someone tell me the original finish for a Pe... Jan 8 2008, 08:47 AM 1970 Neun vierzehn "slackin",
The general consensus is th... Jan 8 2008, 11:28 AM slackin' at work
"slackin",
The general consensus is t... Jan 8 2008, 01:12 PM Pat Garvey
"slackin",
The general consensus is ... Jan 9 2008, 07:29 PM 1970 Neun vierzehn Chris,
I think you'd get some first-hand acco... Jan 8 2008, 03:18 PM Pat Garvey Anodized Jan 8 2008, 04:53 PM davep You don't want to powder-coat rims, that just ... Jan 9 2008, 03:55 PM black73
Has anyone mentioned steel wheels painted body c... Jan 12 2008, 01:14 PM Pat Garvey
Has anyone mentioned steel wheels painted body ... Jan 12 2008, 08:22 PM black73 Well, I am the second owner of this car and I am 9... Jan 13 2008, 10:28 AM Ferg
Well, I am the second owner of this car and I am ... Jan 16 2008, 03:06 PM Pat Garvey Any other historians care to step in here?
Pat Jan 13 2008, 08:52 PM 1970 Neun vierzehn I would venture to say that if that 914 had paint-... Jan 13 2008, 10:25 PM |
13 User(s) are reading this topic (13 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th November 2024 - 10:29 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.