 Dual Webers - Linkage Assistance Needed!, Dual Weber Linkage |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| GAP_914 |
  May 29 2007, 05:01 PM
Post
#1
|
|
Jerry  Group: Members Posts: 6 Joined: 29-May 07 From: Greenwood, Indiana Member No.: 7,769 Region Association: Upper MidWest  |
I need your help! I have a 1975 914 with 2.5L (Raby's kit) that I am installing a set of 40 IDF Weber carburetors on. I have carbs, manifolds and the cross bar with pivot linkage. What I need is any information on how to install the linkage. The carbs and linkage came with the car (in the trunk!) when I bought it. I need to know the right way to hook up the linkage.
Does anyone have drawings/schematics/installation info that your willing to share? Thanks! Jerry GAP_914@yahoo.com |
   |
 
|
  |
Replies
| Jake Raby |
May 30 2007, 01:26 PM
Post
#2
|
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
So, this wasn't a complete "engine kit"??
The 40mm carbs are only effective at 2.1L and less of overall displacement. |
|
|
|
| GAP_914 |
May 30 2007, 04:55 PM
Post
#3
|
|
Jerry Group: Members Posts: 6 Joined: 29-May 07 From: Greenwood, Indiana Member No.: 7,769 Region Association: Upper MidWest |
Sounds like I'll need to buy the 2.0 piston/cylinder kit... Thanks for the info and responses!
|
|
|
|
| GAP_914 |
May 30 2007, 04:57 PM
Post
#4
|
|
Jerry Group: Members Posts: 6 Joined: 29-May 07 From: Greenwood, Indiana Member No.: 7,769 Region Association: Upper MidWest |
... is there a "kit" and what is normally in a kit such as that?
|
|
|
|
Posts in this topic
GAP_914 Dual Webers - Linkage Assistance Needed! May 29 2007, 05:01 PM
904svo Hope this helps you.
May 29 2007, 05:11 PM Jake Raby GAP,
I do not recognize your kit- when did you pur... May 29 2007, 08:58 PM GAP_914 904 svo.... Thanks for the image. It will definite... May 30 2007, 11:46 AM Jake Raby An engine kit?? Cylinder and piston kit?? explaon ... May 30 2007, 05:43 PM
GAP_914 Sounds like I'm confused... (From what I can ... May 30 2007, 08:00 PM sww914 A stock stroke and 96mm pistons make a 2056, which... May 30 2007, 09:11 PM sww914 To get 2506 cc's with a stock crank, you'd... May 30 2007, 09:14 PM GAP_914 Thanks sww914!
That explains a lot and is pro... May 31 2007, 05:09 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st October 2024 - 07:24 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.