![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
customstarr |
![]()
Post
#1
|
King of the Nighttime World ![]() ![]() Group: Members Posts: 116 Joined: 13-February 07 From: Waterford, Michigan - Home of Waterford Hills Road Racing Member No.: 7,531 ![]() |
I'm chasing a "rich over all loads" condition, and I'm down to the MPS and Fuel Pressure. Car is a 1971 with D-Jet.
My questions are: 1. Where do I tap in with my gauge? Do I check both rails? 2. What is the proper pressure (30 PSI)? 3. What direction is the regulator adjuster turned to +/- the pressure? 4. Any clearly defined procedure? I did do a search and found a couple of related posts, but no direct answers. Thanks! |
![]() ![]() |
BMXerror |
![]()
Post
#2
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,705 Joined: 8-April 06 From: Hesperia Ca Member No.: 5,842 ![]() |
Two more things. 1: Nice garage and beautiful car. 2: Where did you get a new TS1?
Mark D. |
customstarr |
![]()
Post
#3
|
King of the Nighttime World ![]() ![]() Group: Members Posts: 116 Joined: 13-February 07 From: Waterford, Michigan - Home of Waterford Hills Road Racing Member No.: 7,531 ![]() |
Two more things. 1: Nice garage and beautiful car. 2: Where did you get a new TS1? Mark D. 1. Thanks - much appreciated. 2. I've been getting most of my Bosch parts from AutoHaus AZ - http://www.autohausaz.com/ Just wondering - the "tap" or "valve" on the fuel rail is very small compared to most, do the pressure gauge kits usually have that size adapter included? I've heard of guys tapping directly to a fuel line with an el-cheapo guage. What about that method? |
computers4kids |
![]()
Post
#4
|
Love these little cars! ![]() ![]() ![]() ![]() Group: Members Posts: 2,443 Joined: 11-June 05 From: Port Townsend, WA Member No.: 4,253 Region Association: None ![]() |
Two more things. 1: Nice garage and beautiful car. 2: Where did you get a new TS1? Mark D. 1. Thanks - much appreciated. 2. I've been getting most of my Bosch parts from AutoHaus AZ - http://www.autohausaz.com/ Just wondering - the "tap" or "valve" on the fuel rail is very small compared to most, do the pressure gauge kits usually have that size adapter included? I've heard of guys tapping directly to a fuel line with an el-cheapo guage. What about that method? I don't know if you have a Harbor Freight near you...but they sell a real cheap fuel pressure testor kit with all the fittings needed to tap into the fuel line off the driver's rail that leads to the cold start valve. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 25th June 2024 - 05:04 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |