![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
orange914 |
![]() ![]()
Post
#1
|
http://5starmediaworks.com/index.html ![]() ![]() ![]() ![]() Group: Members Posts: 3,371 Joined: 26-March 05 From: Ceres, California Member No.: 3,818 Region Association: Northern California ![]() |
anything out there worth looking into that is reasonably priced that gives any horse power gain? (IMG:style_emoticons/default/confused24.gif)
mike |
![]() ![]() |
Jake Raby |
![]()
Post
#2
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
What induction???
These heads are good for 125HP with a 2056 with carbs, using stock FI limits the output to a "safe" 110HP or so.. |
orange914 |
![]()
Post
#3
|
http://5starmediaworks.com/index.html ![]() ![]() ![]() ![]() Group: Members Posts: 3,371 Joined: 26-March 05 From: Ceres, California Member No.: 3,818 Region Association: Northern California ![]() |
What induction??? These heads are good for 125HP with a 2056 with carbs, using stock FI limits the output to a "safe" 110HP or so.. it's stock 1.7 d-jet. i will go 96mm 8.0:1 either choice heads i deside, but not touching bottom end. by the way i need to check the cost of 96mm pistons/cyl's if i purchase these heads, do you sell these? what kind of $ do you want for cyl.'s & heads? thanks, mike |
toon1 |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,849 Joined: 29-October 05 From: tracy,ca Member No.: 5,022 ![]() |
What induction??? These heads are good for 125HP with a 2056 with carbs, using stock FI limits the output to a "safe" 110HP or so.. it's stock 1.7 d-jet. i will go 96mm 8.0:1 either choice heads i deside, but not touching bottom end. by the way i need to check the cost of 96mm pistons/cyl's if i purchase these heads, do you sell these? what kind of $ do you want for cyl.'s & heads? thanks, mike You might be in for a prob. with the stock 1.7 injection sys. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 28th June 2024 - 02:10 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |