![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
atmadsen914 |
![]()
Post
#1
|
Am I sure I like old cars? ![]() Group: Members Posts: 45 Joined: 7-September 07 From: Carlinville IL Member No.: 8,087 Region Association: Upper MidWest ![]() |
I see this topic discussed many times before but I seem to be scratching my head every time so I will just post it one more time.
I am doing an engine build up this winter for my ‘73. I have a 1.7 core. I have a set of rebuilt 2.0L heads. I am looking for a strong daily driver. As with all of these builds there is a cost vs. benefit issue. I am not going to race the car and I do not need a mega hp motor to brag about to the bar buddies. However I don’t want to leave any power on the table. It looks like the KB pistons and the AA cylinders are the right way to go. But size is leaving scratching my head. I know someone told me “size matters and bigger is better” but I am never quite sure! So I leave it to you guys. I need advice on Piston and Cylinder combos and a cam. Thanks in advance and sorry for being the 3489 person to post this question. |
![]() ![]() |
Jake Raby |
![]()
Post
#2
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
I try to keep commercial type piosts away from these other forums.. Feel free to register on my forums and get as much info as you'd ever want or need about pricing and possibilities...
Thats why I set my forums up. |
atmadsen914 |
![]()
Post
#3
|
Am I sure I like old cars? ![]() Group: Members Posts: 45 Joined: 7-September 07 From: Carlinville IL Member No.: 8,087 Region Association: Upper MidWest ![]() |
I try to keep commercial type piosts away from these other forums.. Feel free to register on my forums and get as much info as you'd ever want or need about pricing and possibilities... Thats why I set my forums up. Ok I joined up. Does anyone out there have opinions on the 1911 or the 2056? Is is a strong runner how is the power of the stock 1.7 setup? |
VaccaRabite |
![]()
Post
#4
|
En Garde! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 13,479 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region ![]() |
Ok I joined up. Does anyone out there have opinions on the 1911 or the 2056? Is is a strong runner how is the power of the stock 1.7 setup? Optimally done, ~125 HP at the crank seems to be the goal. Expect somewhere between 110 and 125. Not a lot compared to todays standards, but our cars are lighter, and geared fairly low. Stock on a 1.7 is ~70HP I think. Zach |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 28th June 2024 - 11:42 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |