 Correct brake fluid for a 1973 2.0? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| NJ914Guy |
 Jan 30 2011, 06:28 PM
Post
#1
|
|
Member  Group: Members Posts: 150 Joined: 30-December 10 From: Deptford, NJ Member No.: 12,546 Region Association: MidAtlantic Region  |
I need to replace the cap/seal on the break fluid reservoir; have some weeping into the top catch area and the rubber seal on the cap is bad (no fluid on the floor inside the car). There is still plenty of fluid in the master cylinder reservoir and the breaks feel great! So I think I caught it before air entered the system.
Before replacing the cap/seal, I want to top off the break fluid. Any recommendations for what type of fluid to add? And is it OK to mix & match with what's already in there? Thanks! -Chuck |
   |
 
|
Posts in this topic
NJ914Guy Correct brake fluid for a 1973 2.0? Jan 30 2011, 06:28 PM
detoxcowboy Myself and alot of others use Ate Super Blue DOT 4... Jan 30 2011, 07:47 PM tomeric914 Googling "break fluid" may yield coffee ... Jan 30 2011, 08:14 PM
detoxcowboy
Googling "break fluid" may yield coffee... Jan 30 2011, 08:31 PM NJ914Guy Thanks for the tips guys. Problem is, I don't... Jan 30 2011, 08:39 PM Vysoc Who cares what's in there now. It is obviously... Jan 30 2011, 08:58 PM McMark Unless the put DOT5 in there. :P
I used to use C... Jan 30 2011, 10:48 PM realred914 any DOT3 or DOT4 fluid will work for you, it is ad... Feb 1 2011, 04:37 PM Eric_Shea Depending upon your driving style, use DOT4 or 5.1... Feb 1 2011, 08:02 PM Cap'n Krusty Before you consider topping off the fluid, take a ... Feb 1 2011, 08:31 PM NJ914Guy Thanks all. Yes, the pads are new as well as the r... Feb 1 2011, 08:38 PM detoxcowboy Dot 4 should be fine unless the PO put in Dot 5 (d... Feb 1 2011, 08:46 PM GeorgeRud If you're not sure, take a bit of the old flui... Feb 1 2011, 09:10 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th January 2025 - 11:19 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.