 dumb D-Jet question, is there a specific way connectors have to go in? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DrifterJay |
 Feb 23 2011, 04:05 AM
Post
#1
|
|
I break stuff...  Group: Members Posts: 1,034 Joined: 25-May 03 From: Oceanside, California Member No.: 737 Region Association: None  |
Okay, after dealing with my whole car not shutting off issues, I started to do some harness overhaul. This involved the removal of my ignition harness and injection harness. I ended up replacing about 10 feet of crappy wiring (repaired right with solder and shrinkwrap..) in my ignition harness and the repair of a handful of cracked wires on my injection harness. Put it all back together... now she won't start. Fanfuckingtastic. One thing I noticed on the d-jet harness is that on most of the plugs, they can go into the female receptacle either way. Does it matter which way they go in? Especially on the distributor, tps and mps? They slide in relatively easily both ways... (IMG:style_emoticons/default/dry.gif)
|
   |
 
|
Posts in this topic
DrifterJay dumb D-Jet question Feb 23 2011, 04:05 AM
larss It does not matter which way the injector plugs go... Feb 23 2011, 05:45 AM 76-914 :agree: if it matters then the plug will only fit ... Feb 23 2011, 08:52 AM Jeff Bowlsby Most of the D-Jet connectors are symmetrically wir... Feb 23 2011, 09:34 AM
vsg914 Make sure the 16 pin connector on the relay board ... Feb 23 2011, 10:00 AM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th February 2025 - 01:50 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.