 Changing Fan Belt in a /6 with A/C, Can't be hard, right? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| iiibdsiil |
 Jul 6 2004, 10:12 PM
Post
#1
|
|
Needs Door Locks  Group: Members Posts: 605 Joined: 19-November 03 From: Tampa / Boca Raton, FL Member No.: 1,362  |
My fan belt is pretty loose on the 3.2. I figure for the extra $15, just replace it. Anyways, I have seen 911 belts done, kinda. I know there are the shims which you have to adjust accordingly.
So, my problems comes with the A/C and the shims. How does this work? Does each one have to be shimmed seperately, A/C and fan belt, or what? Also, there is a special wrench for this too, correct? Since you have to take the center bolt out and not let the motor turn over? Am I going to run into any problems with the fan being kinda close to the firewall? I know most of the /6 conversions, at least on the race cars, have a cut out in the firewall to make life easier. I a willing to do this at some point, but the belt is starting to scare me now. Anything else I need to know? Thanks in advance. - Brett Smith |
   |
 
|
Posts in this topic
iiibdsiil Changing Fan Belt in a /6 with A/C Jul 6 2004, 10:12 PM
joea9146 The tension on the Airconditiong belt is adjusted ... Jul 7 2004, 01:22 PM Gint I can't speak to the AC, but the fan belt does... Jul 7 2004, 01:24 PM iiibdsiil I looked up the tool, on the other board, so I kno... Jul 7 2004, 02:15 PM
ein 6er brett,
it isn't that hard to do, just a littl... Jul 7 2004, 06:55 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 06:31 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.