 Red rear reflector And trunk release, See pic |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim_hoyland |
 Mar 22 2013, 05:22 PM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,561 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
Do you mount the trunk release switch next to the engine lid pull ? If so, how long a switch is needed to go through the fire wall and backpad ? Seems like there are better places to put it- what do you have ?
And, how is the emergency pull wire mounted to the solenoid? I don't see a place where there is going to be sufficient leverage (IMG:http://www.914world.com/bbs2/uploads_offsite/i721.photobucket.com-643-1364056945.1.jpg) |
   |
 
|
Posts in this topic
jim_hoyland Red rear reflector And trunk release Mar 22 2013, 05:22 PM
914itis When I had mine, it was under the arm rest mounted... Mar 22 2013, 05:30 PM JamesM mine is under the dash near the fuse panel Mar 22 2013, 05:53 PM pcar916 This is an electrical switch right? Why wouldn... Mar 22 2013, 06:16 PM PanelBilly Years ago when I had one of these I added a solid ... Mar 22 2013, 06:30 PM struckn Mine is to the right and above the rear Tag on the... Mar 22 2013, 06:52 PM
ruby914
Mine is to the right and above the rear Tag on th... Mar 24 2013, 12:13 AM injunmort mine is mounted under dash right next to the fuse ... Mar 22 2013, 07:02 PM Jeffs9146 Mine is mounted in the corner of the fuse panel... Mar 22 2013, 07:08 PM injunmort mine is in the same spot on the other side of the ... Mar 22 2013, 07:13 PM Jeffs9146
mine is in the same spot on the other side of the... Mar 22 2013, 07:18 PM kg6dxn On my old 914, it was mounted into the glove box. ... Mar 22 2013, 07:23 PM jim_hoyland My second question is How do I attach the emergenc... Mar 23 2013, 09:14 AM kg6dxn
My second question is How do I attach the emergen... Mar 23 2013, 09:38 AM Maltese Falcon I mount the safety pull wire to the fulcrum point ... Mar 23 2013, 09:57 AM jim_hoyland
I mount the safety pull wire to the fulcrum point... Mar 23 2013, 06:40 PM Vacca Rabite Of course, unless you need to lock your trunk, you... Mar 23 2013, 10:14 AM jim_hoyland Pictures coming:
http://www.914world.com/bbs2/upl... Mar 23 2013, 10:29 AM kg6dxn If it were mine... I would weld a bracket... Like ... Mar 23 2013, 04:34 PM Jeffs9146 Here is how I did mine on my 74!
It has a han... Mar 23 2013, 04:41 PM jim_hoyland Jeff - Did you make any mods to the solenoid ? Loo... Mar 23 2013, 06:31 PM Jeffs9146 Yes I made another pin that holds the pivot arm to... Mar 23 2013, 06:51 PM jim_hoyland
Yes I made another pin that holds the pivot arm t... Mar 23 2013, 08:05 PM Jeffs9146
Yes I made another pin that holds the pivot arm ... Mar 24 2013, 03:03 PM Steve Snyder I used an extra fog light switch with a blanked-ou... Mar 24 2013, 07:26 AM rdauenhauer Mine is in a nearby lake, along with the rest of t... Mar 24 2013, 12:36 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 12:34 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.