 Brake Pad Dragging on Front Rotor, Speader Spring Installed Wrong? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VWTortuga336 |
 Sep 13 2015, 08:24 PM
Post
#1
|
|
Member  Group: Members Posts: 285 Joined: 5-October 14 From: Kansas City, Missouri Member No.: 17,979 Region Association: None  |
Just installed freshly rebuilt calipers with new pads and hardware on my '74. Now the pad closest to the inside of the car seems to be rubbing on the rotor. I was thinking maybe I had the spreader spring installed incorrectly, but I can't even push the pad back any further by hand either.
Any thoughts on what would cause this?  |
   |
 
|
Posts in this topic
VWTortuga336 Brake Pad Dragging on Front Rotor Sep 13 2015, 08:24 PM
Cupomeat I doubt it is the spreader spring.
Remove the spri... Sep 13 2015, 09:12 PM bandjoey Isn't there a metal plate that sits on the pis... Sep 13 2015, 10:29 PM bandjoey Picture from PMB. Thank you. Your 914 brake expert... Sep 13 2015, 10:35 PM stugray Push the piston all the way in using a C-Clamp (ma... Sep 14 2015, 07:11 AM Dave_Darling Are those the right spreaders? They don't loo... Sep 14 2015, 08:59 AM stugray I don't believe the "spreaders" actu... Sep 14 2015, 09:05 AM
mgp4591
I don't believe the "spreaders" act... Sep 14 2015, 09:17 AM VWTortuga336 I tried pushing the piston back into the caliper. ... Sep 14 2015, 01:27 PM r_towle Bleed the brakes again, if the piston won't st... Sep 14 2015, 01:36 PM VWTortuga336
Bleed the brakes again, if the piston won't s... Sep 14 2015, 02:17 PM stugray
[quote name='r_towle' post='2237287' date='Sep 14... Sep 14 2015, 02:32 PM VWTortuga336 I removed the bleed nipples, no change. Pistons ar... Sep 14 2015, 03:57 PM porschetub
Just installed freshly rebuilt calipers with new ... Sep 14 2015, 04:49 PM r_towle Finish the job, then troubleshoot it.
With no flu... Sep 14 2015, 06:28 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th January 2025 - 08:16 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.