 Brake Resourvoir Feed Lines, Inserting the Feed Lines into the Master Cylinder |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| NS914 |
 Oct 2 2016, 12:43 PM
Post
#1
|
|
Member  Group: Members Posts: 198 Joined: 9-June 09 From: Dartmouth, Nova Scotia Member No.: 10,455 Region Association: Canada 
 |
I expect the more experienced among you will know this but, I literally just put mine together yesterday. Much easier than I thought.
I had heard that you need to drop the Master Cylinder in order to press the lines in place and in fact tried that out....as it turned out the most effective aspect of this exercise was to swab a little brake fluid seals...the feed lines dropped in place with no fuss at all. I hope this helps someone or at the very least makes you aware its not that big a deal at all. Grant |
   |
 
|
Posts in this topic
NS914 Brake Resourvoir Feed Lines Oct 2 2016, 12:43 PM
NS914 [quote name='NS914' date='Oct 2 2016, ... Oct 2 2016, 12:45 PM Eric_Shea It's a "huge" deal and I've done... Oct 2 2016, 12:58 PM
87m491 Not an option for all, but as my fuel tank was out... Oct 2 2016, 04:47 PM
914bub
It's a "huge" deal and Also, everyo... Oct 2 2016, 11:47 PM euro911 :agree: I took Eric's advice and I pull the fa... Oct 2 2016, 05:06 PM 87m491 I wonder if it was the "dousing" of brak... Oct 2 2016, 05:40 PM mepstein It's also easy if you leave out the metal wash... Oct 2 2016, 06:13 PM SKL1 That is one of the biggest PITA jobs in the world... Oct 2 2016, 08:37 PM euro911 That is one of the biggest PITA jobs in the world... Oct 2 2016, 08:59 PM jmitro I bought the new plastic reservoir feed lines from... Oct 4 2017, 05:49 PM Perry Kiehl I too suspect the washers are in the box, and not ... Oct 4 2017, 07:57 PM second wind
I too suspect the washers are in the box, and not... Oct 4 2017, 08:08 PM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 06:04 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.