 Newbie oil leak below #4 cylinder? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Robson51 |
 Dec 22 2019, 07:55 PM
Post
#1
|
|
Member  Group: Members Posts: 88 Joined: 18-November 19 From: seattle Member No.: 23,654 Region Association: Pacific Northwest  |
Still working on my son's '74 2.0. Replaced the oil cooler seals with the motor in the car, put the heat shields back but not the heating system and drove it maybe 25 miles.
We have fresh oil on the shield coming down from the #4 cylinder area. I was figuring the pushrod tube seals were gone, and there is some evidence of that, but it almost seems like there is oil coming from above the pushrod tubes. My thought is I screwed up the oil cooler seals, or the oil cooler is bad, or there is something I don't know about on this corner of the motor that can leak. New valve cover gaskets are good. Any ideas? Just about ready to pull the motor to find out. If we go that far, we will replace the oil cooler just in case, but looking for clues. TIA- Rob |
   |
 
|
Posts in this topic
Robson51 Newbie oil leak below #4 cylinder? Dec 22 2019, 07:55 PM
injunmort really difficult to replace cooler seals while eng... Dec 22 2019, 08:11 PM Robson51 It wasn't the easiest thing I've ever done... Dec 22 2019, 08:18 PM injunmort the filter console, pushrod tube seals, cylinder b... Dec 22 2019, 08:21 PM
Robson51
the filter console, pushrod tube seals, cylinder ... Dec 22 2019, 09:42 PM scottthephotog You said it might be coming from above. Have you c... Dec 22 2019, 09:21 PM cuddy_k I vote oil pressure sender leak and/or the replace... Dec 22 2019, 11:00 PM porschetub No real point in doing what you have without doing... Dec 22 2019, 11:54 PM Superhawk996 :wttc:
Drop the motor. Biggest mistake made whe... Dec 23 2019, 03:31 AM Robson51
:wttc:
Drop the motor. Biggest mistake made wh... Dec 23 2019, 08:53 AM Superhawk996
Anyone have a Tangerine Racing engine cradle for... Dec 23 2019, 11:19 AM SirAndy Drop the motor. Biggest mistake made when working... Dec 23 2019, 11:31 AM cuddy_k Just rip off the band aid and drop the motor:) itâ... Dec 23 2019, 09:41 AM IronHillRestorations If you have a large floor jack and a hoist, Tanger... Dec 23 2019, 09:53 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 03:27 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.