 Torque for nuts on the rubber motor mounts, Overshot it the first time |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Chaznaster |
 Feb 17 2023, 06:58 PM
Post
#1
|
|
Member  Group: Members Posts: 325 Joined: 22-November 15 From: Concord, MA Member No.: 19,389 Region Association: North East States 
 |
Hi All.
I went with 21.7 ftlb based on Haynes and destroyed the threads on the rubber mount that goes between the engine and the mounting bar. The generic torque specs (google) for M8 are listed as 19.5 ftlb max. I went over ... but is that enough to cause a failure? I am thinking maybe I did not get the Haynes spec right and the 21.7 is for the mounting bar to chassis bolts and brackets to case, which are bigger. Or the mount is not hardened steel? How tight should I make those bolts (once I get a replacement set of rubber mounts, that is). Many thanks. |
   |
 
|
Posts in this topic
Chaznaster Torque for nuts on the rubber motor mounts Feb 17 2023, 06:58 PM
sixnotfour The shaft stripped ,, not high quality , But, also... Feb 17 2023, 07:45 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th January 2025 - 01:35 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.