 OT: 914 Front Turnsignal Bucket for 356 Rear Turnsignals, Custom LED time |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Spoke |
 Oct 28 2023, 12:26 PM
Post
#1
|
|
Jerry  Group: Members Posts: 7,089 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None 
 |
Apparently 356 guys use the front turnsignal bucket from the 914 for rear turnsignals and brakes. They actually look really nice.
A fellow asked if I could design some LEDs for the application. The LEDs will be red and will serve as the running lights, brake lights, and turnsignals. The picture below is not his car. He originally wanted to do red running/brake LEDs under the red portion and amber LEDs under the amber portion. After some discussion, we decided to do all red LEDs for running/brake/turnsignals. So the entire lens will be red or clear. Since the boards are at a unique angle left to right, a one-sided board cannot be used on both sides. So this board will be reversible. The LEDs can be mounted on either side of the board as well as all the components. This was a very busy board with all the extra components on both sides. To be able to blink the turnsignals when the brakes are on, I'm using the same blanking circuit that I use on the 914 euro front turnsignals. Attached thumbnail(s)   
|
   |
 
|
Posts in this topic
Spoke OT: 914 Front Turnsignal Bucket for 356 Rear Turnsignals Oct 28 2023, 12:26 PM
Montreal914 That is neat looking! Where do they get the re... Oct 28 2023, 01:36 PM
Spoke
That is neat looking! Where do they get the r... Oct 30 2023, 04:24 AM JmuRiz Strange, must be an outlaw thing…I like thinking... Oct 28 2023, 09:18 PM JmuRiz Off topic, now I need to get my carbs starting aft... Oct 28 2023, 09:18 PM mate914
Apparently 356 guys use the front turnsignal buck... Oct 29 2023, 07:59 AM JmuRiz
914 tach? Is this a type 4 conversion? If so can ... Oct 30 2023, 07:27 AM Shivers I like the old lights. But I can’t leave stuff a... Oct 30 2023, 12:10 PM Spoke Got the boards back and assembled. Works as design... Nov 30 2023, 07:35 PM Cairo94507 Another great product from Jerry! :beer2: Dec 1 2023, 10:35 AM Spoke With the LEDs offset on the board and before bendi... Dec 3 2023, 11:22 AM Spoke The LEDs look a bit more uniform when bent into po... Dec 3 2023, 11:25 AM TheRuttmeister Have you tested amber LED's under the red lens... Dec 3 2023, 05:32 PM Spoke
Have you tested amber LED's under the red len... Dec 3 2023, 05:43 PM euro911 I'm all for folks doing what they want with th... Dec 3 2023, 06:09 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th November 2024 - 03:43 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.