 Hard hot starting solution…? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| oakdalecurtis |
 Oct 8 2024, 03:08 PM
Post
#1
|
|
Oakdalecurtis  Group: Members Posts: 1,346 Joined: 5-June 15 From: Oakdale, Ca Member No.: 18,802 Region Association: Central California 
 |
I know we’ve discussed this, but here’s the situation. 76 fuel injected with stock 2.0 other than Crane ignition, runs perfectly. I installed the 6v Ford relay on the starter a few years ago. Good Optima redtop battery. I have cleaned all the grounds at body and transmission. Still, after driving and shut off, it barely, if at all, turns over on immediate restarts. I thought I would just run a negative cable directly from the battery negative post to the starter to see if that helped. Questions:
Is that an appropriate possible fix? If so, what gauge cable (will make one up) should I use? Any thoughts on general optimal routing in the engine bay? Any other thought? Ty |
   |
 
|
Posts in this topic
oakdalecurtis Hard hot starting solution…? Oct 8 2024, 03:08 PM
emerygt350 I ran a neg cable from the battery post to the fan... Oct 8 2024, 03:22 PM
oakdalecurtis
I ran a neg cable from the battery post to the fa... Oct 8 2024, 07:58 PM
oakdalecurtis
I ran a neg cable from the battery post to the fa... Oct 10 2024, 01:36 PM 914werke RE: Hard hot starting solution…? Oct 8 2024, 08:22 PM technicalninja
I ran a neg cable from the battery post to the f... Oct 8 2024, 08:37 PM emerygt350 Yep, that one is a starter cable from flaps for a ... Oct 9 2024, 05:18 AM davep This was my solution 20 years ago and it worked. t... Oct 9 2024, 07:18 AM r_towle I might suggest the 50 year old starter needs lubr... Oct 9 2024, 06:53 PM rick 918-S I am not a believer in those Rubgoldberg devices. ... Oct 9 2024, 08:14 PM emerygt350 excellent. Make sure you keep the body ground as ... Oct 10 2024, 01:41 PM 914werke I am not a believer in those Rubgoldberg devices.... Oct 10 2024, 06:04 PM emerygt350
I am not a believer in those Rubgoldberg devices... Oct 10 2024, 06:39 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd December 2024 - 05:06 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.