 2056 Build |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| SteveNMaine |
 Dec 2 2024, 08:17 AM
Post
#1
|
|
Newbie  Group: Members Posts: 7 Joined: 12-August 24 From: Maine Member No.: 28,288 Region Association: None  |
I am trying to work out compression ratio of my 2056 build. In calculating head volume my understanding from the forum is that stock 2.0 heads have 57mm and the valve pockets on the pistons I am going to use is 3mm. Do I add these together to use 60mm in my calculations for head volume?
|
   |
 
|
Posts in this topic
SteveNMaine 2056 Build Dec 2 2024, 08:17 AM
Geezer914 Yes, anything that adds volume. Dec 2 2024, 09:25 AM technicalninja You should measure the valve depressions, head CCs... Dec 2 2024, 09:50 AM rfinegan IM doing this too..
This may help
https://www.yout... Dec 2 2024, 12:31 PM technicalninja Another tip is to reduce the surface tension of th... Dec 2 2024, 12:56 PM barefoot My understanding is that 2L heads are 60 cc and 1,... Dec 2 2024, 06:40 PM Jack Standz
I am trying to work out compression ratio of my 2... Dec 2 2024, 10:41 PM emerygt350 I used my kids crayon clay and compared it to oil,... Dec 3 2024, 06:25 AM 930cabman
I am trying to work out compression ratio of my 2... Dec 3 2024, 10:59 AM technicalninja
[quote name='SteveNMaine' post='3179889' date='De... Dec 3 2024, 12:16 PM porschetub Did all that when I did my last build for a custom... Dec 3 2024, 04:15 PM emerygt350 Well spent time. And on a type 4 it's some pre... Dec 3 2024, 04:55 PM
technicalninja @porschetub The .028 on the top of the piston is... Dec 3 2024, 05:42 PM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th December 2024 - 12:52 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.