 Tail shifter ball bushings, Are they really balls? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jaiden |
 Oct 6 2005, 07:08 AM
Post
#1
|
|
Member  Group: Members Posts: 346 Joined: 13-January 05 From: Stroudsburg PA Member No.: 3,443  |
So while tinkering with the teener I decide to take care of the sloppy shifting and after unhooking the shaft from the tranny noticed alot of slop in the ball bushings.
Upon inspection the bushings look like balls with a flat section all the way around are they supposed to be this way? There is alot of slop in the joint. Also at the connection between the shaft and the tranny is there supposed to be a bushing in there because I do not have one? Thanks for the info. I don't have any pics yet but will try to get some tonight. |
   |
 
|
Posts in this topic
Jaiden Tail shifter ball bushings Oct 6 2005, 07:08 AM
Jaiden well I ordered new ball bushings and the pic looks... Oct 6 2005, 08:01 AM Cap'n Krusty Oct 6 2005, 08:57 AM Jaiden Any pics or specs on the finger? what should it lo... Oct 6 2005, 09:07 AM lapuwali There needs to be *some* play in the knife-and-for... Oct 6 2005, 09:19 AM Jaiden Thanks for the details.
The shifter bushing have ... Oct 6 2005, 09:28 AM lapuwali Oct 6 2005, 11:15 AM Jaiden I have dug in a little further into the tailshifte... Oct 7 2005, 06:04 AM
lapuwali Seal up the tail cover with Hylomar (FLAPS will ha... Oct 7 2005, 09:21 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th June 2024 - 05:37 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.