 Valve stem failure |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| John2kx |
 Sep 2 2003, 08:12 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 502 Joined: 22-August 03 From: Augusta, Ga. Member No.: 1,066  |
I'm running 5 lug Fuchs on my 914 and have had two valve stem failures since wheels were installed 6 months ago. Both failures have been on the front and on opposite sides. Failures both seem to be from shank section of stem and have shown up as slow leaks luckily and not total failures while at speed.
I use the best tire shop in town for mounting and balance and see many high end cars worked on there. Is my tire guy missing something? The stems used are a rubber material. I seem to remember seeing some type of stem support back in the 70's. Are these required? My car does see 100 mph on a regular basis and 130 or so on occasion if this makes a difference. John |
   |
 
|
Posts in this topic
John2kx Valve stem failure Sep 2 2003, 08:12 PM
ArtechnikA Brad Roberts You nailed it Rich. He probably has the tube style... Sep 3 2003, 12:22 AM John2kx Thanks guys for the information. I'll pull wh... Sep 3 2003, 01:54 AM John2kx I just found a Fuch wheel chart here and it only s... Sep 3 2003, 02:03 AM Brad Roberts yeah.. I forgot you had 16's.. only the 14... Sep 3 2003, 03:01 AM ! A lot of stems are put in dry.....I always use a g... Sep 3 2003, 03:24 AM Racer Chris Are you sure he installed new valve stems? A lot ... Sep 3 2003, 06:12 AM ArtechnikA campbellcj I have used metal stems in the past with good resu... Sep 3 2003, 07:09 AM VegasRacer I have always used the metal valve stems on my rac... Sep 3 2003, 07:25 AM DuckRyder BBS makes some metal bolt in stems.
Many of the B... Sep 3 2003, 07:44 AM
John2kx Spoke with my tire guy today and felt he was hones... Sep 3 2003, 03:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2024 - 12:44 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.