Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

4 Pages V  1 2 3 > »   
 Reply to this topicStart new topic
> Honda V-6 in the 914, engine options
tomrev
post Dec 19 2015, 03:04 PM
Post #1


Member
**

Group: Members
Posts: 231
Joined: 25-February 14
From: N. Mich.
Member No.: 17,037
Region Association: None
Thought I'd put up a few photo's of my current 914 project. I had a six from 1984 to 1998; started with the 2.0 T, then a 2.0S, to a 2.7, and finally a 3.0, with RSR pistons, Solex cams and a few other tweaks. She was a blast to drive, and I drove her to work, and vintage raced her for many years. About six years ago the 914 urge returned, and I built a few V8 cars, one with a LS, the other with old school SBC. They were both cool, and super fast, but just didn't sound right, so I began thinking of another six. Once the price shock passed, I knew it wasn't going to be a Porsche six, and started learning about some alternatives, and settled on the Honda 3.5 V6 from the Pilot, etc. They are all aluminum, variable valve timing, compact, light, and dirt cheap, and make around 250HP, and Ft. Lbs, a nice level for a 914. And happily, Kennedy makes the adapter kit, so that part is out there.
After a trip to the junk yard to look at, and measure, it seemed close enough to bring one home, and really start playing with it. I am aware of one other 914 with this engine in it, but it's a solo car, with out a trunk floor, etc., so one problem fitting it in. I have a nice 20K original car, too nice to start cutting up, so if the engine wouldn't go in, I'd give it up. (The car was a V8 car almost from new, don't panic!).
The engine is very compact, but the intake spreads out over the gearbox, and would stick way into the trunk. Fortunately, the intake can be flipped 180 deg., and by cutting off the throttle body, and re-welding it onto the side, the engine becomes nice and workable. It is a tight squeeze, but fits almost like it was designed to be there.Attached Image Attached Image


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tomrev
post Dec 19 2015, 03:07 PM
Post #2


Member
**

Group: Members
Posts: 231
Joined: 25-February 14
From: N. Mich.
Member No.: 17,037
Region Association: None
The intake and water passage mods: Because the dune buggy guy's are using this engine, there are sources for de-bugging the ECU, and the main things you have to do to make the install work, are the pictured mods, and making a front engine mount.


Attached thumbnail(s)
Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
siverson
post Dec 19 2015, 03:10 PM
Post #3


Advanced Member
****

Group: Benefactors
Posts: 2,451
Joined: 5-May 03
From: San Diego, CA
Member No.: 654
Region Association: Southern California
Neat! And thanks for posting.

Are those your welds? They look great...

-Steve
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
914bub
post Dec 19 2015, 03:12 PM
Post #4


Member
**

Group: Members
Posts: 433
Joined: 16-August 13
From: Modesto CA.
Member No.: 16,260
Region Association: None
I'll be watching this for sure. Those engines are AWESOME. I have a 2007 Pilot with that engine in it. I couldn't be happier.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cracker
post Dec 19 2015, 03:13 PM
Post #5


Advanced Member
****

Group: Members
Posts: 2,148
Joined: 2-February 10
From: Atlanta (area)
Member No.: 11,316
Region Association: South East States
Looks good...how much does the complete engine weigh? We've had an odyssey in the family for the last 15 years and never once ounce of engine trouble. Good choice.

T
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tomrev
post Dec 19 2015, 03:15 PM
Post #6


Member
**

Group: Members
Posts: 231
Joined: 25-February 14
From: N. Mich.
Member No.: 17,037
Region Association: None
I"m looking forward to hearing it; the firing order is from front to back, side to side, 1-4-2-5-3-6, so it could sound pretty cool. Once the engine bar comes back from the powder coater, I can put is back in for good, and finish up exhaust pipes, and plumbing.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tomrev
post Dec 19 2015, 03:18 PM
Post #7


Member
**

Group: Members
Posts: 231
Joined: 25-February 14
From: N. Mich.
Member No.: 17,037
Region Association: None
QUOTE(Cracker @ Dec 19 2015, 01:13 PM) *
Looks good...how much does the complete engine weigh? We've had an odyssey in the family for the last 15 years and never once ounce of engine trouble. Good choice.


I think with the flywheel, clutch and alternator it will weigh 365 lbs. Weight is up higher in the car, as it's a 60 deg.V, but at $450. it's a nice start! On the welds, I'm good with a Mig, no so with Tig, so I make all the parts, superglue them together, and have a weld shop finish them.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JRust
post Dec 19 2015, 04:32 PM
Post #8


914 Guru
*****

Group: Members
Posts: 6,310
Joined: 10-January 03
From: Corvallis Oregon
Member No.: 129
Region Association: Pacific Northwest
Looks cool! I'll be watching to see it finished. Looks like a good option
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
EdwardBlume
post Dec 19 2015, 07:45 PM
Post #9


914 Wizard
**********

Group: Members
Posts: 12,338
Joined: 2-January 03
From: SLO
Member No.: 81
Region Association: Central California
I had an 04 RL. That motor is the best and will run forever. Easily oil changes too!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Dec 19 2015, 08:19 PM
Post #10


914 Freak!
***************

Group: Members
Posts: 17,150
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
Nice start...I think if I ever do another swap (or should I say if I ever start another swap to give up on and sell) this motor would be the one to pick!

Andy, can you create a filter so I don't see anymore conversions like this so I stay focused? (IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JmuRiz
post Dec 19 2015, 09:07 PM
Post #11


914 Guru
*****

Group: Members
Posts: 5,504
Joined: 30-December 02
From: NoVA
Member No.: 50
Region Association: MidAtlantic Region
Amazing how large a 914 engine bay is, isn't it?
Who would have thunk an engine that tall would fit..and the price is right!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ssuperflyoldguy
post Dec 19 2015, 09:35 PM
Post #12


Member
**

Group: Members
Posts: 173
Joined: 15-November 15
From: NorCal - East Bay Baby!
Member No.: 19,364
Region Association: None
So cool! That's the swap for me, have a 2003 Pilot & quite happy with the engine, 175k & not even a plug change, just planned timing belt change. Big fan of them, can't wait for more updates.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cali914
post Dec 19 2015, 09:42 PM
Post #13


cali914
**

Group: Members
Posts: 455
Joined: 26-April 06
From: Berkeley Ca.
Member No.: 5,934
Region Association: Northern California
Looking good. If I had to do it over get the 3.2 I think to turn it sideways in the 914 and use the 5 speed with limited slip and axles into the 914 hubs 24 hrs all day and night.Attached Image Attached Image (IMG:style_emoticons/default/driving-girl.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cali914
post Dec 19 2015, 09:44 PM
Post #14


cali914
**

Group: Members
Posts: 455
Joined: 26-April 06
From: Berkeley Ca.
Member No.: 5,934
Region Association: Northern California
Looks a lot prettier nowAttached Image Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Andyrew
post Dec 19 2015, 10:39 PM
Post #15


Spooling.... Please wait
**********

Group: Members
Posts: 13,377
Joined: 20-January 03
From: Riverbank, Ca
Member No.: 172
Region Association: Northern California
Great looking project!!! Fantastic motor! Should be a blast when done.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Dec 19 2015, 11:02 PM
Post #16


Resident German
*************************

Group: Admin
Posts: 41,889
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE(Mueller @ Dec 19 2015, 06:19 PM) *
Andy, can you create a filter so I don't see anymore conversions like this so I stay focused? (IMG:style_emoticons/default/smile.gif)

(IMG:style_emoticons/default/lol-2.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mgp4591
post Dec 19 2015, 11:03 PM
Post #17


914 Guru
*****

Group: Members
Posts: 5,481
Joined: 1-August 12
From: Salt Lake City Ut
Member No.: 14,748
Region Association: Intermountain Region
QUOTE(cali914 @ Dec 19 2015, 08:42 PM) *

Looking good. If I had to do it over get the 3.2 I think to turn it sideways in the 914 and use the 5 speed with limited slip and axles into the 914 hubs 24 hrs all day and night.Attached Image Attached Image (IMG:style_emoticons/default/driving-girl.gif)

I thought about that also since I worked in a major Honda dealership in the shop. I took the measurements and after you line up the max angles for the CVs and get the trans where it's not dragging on the ground, you end up with the engine partially in the trunk and sticking out about 5 inches worth. I hated to give up on the idea because it's such a sweet package all in one - plus you could call it a Pornda... (IMG:style_emoticons/default/shades.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Dec 19 2015, 11:11 PM
Post #18


914 Freak!
***************

Group: Members
Posts: 17,150
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
QUOTE(mgp4591 @ Dec 19 2015, 09:03 PM) *

QUOTE(cali914 @ Dec 19 2015, 08:42 PM) *

Looking good. If I had to do it over get the 3.2 I think to turn it sideways in the 914 and use the 5 speed with limited slip and axles into the 914 hubs 24 hrs all day and night.Attached Image Attached Image (IMG:style_emoticons/default/driving-girl.gif)

I thought about that also since I worked in a major Honda dealership in the shop. I took the measurements and after you line up the max angles for the CVs and get the trans where it's not dragging on the ground, you end up with the engine partially in the trunk and sticking out about 5 inches worth. I hated to give up on the idea because it's such a sweet package all in one - plus you could call it a Pornda... (IMG:style_emoticons/default/shades.gif)

Insert Hijack (IMG:style_emoticons/default/smile.gif)

You could have used chain drive like the S600

Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cali914
post Dec 19 2015, 11:16 PM
Post #19


cali914
**

Group: Members
Posts: 455
Joined: 26-April 06
From: Berkeley Ca.
Member No.: 5,934
Region Association: Northern California
QUOTE(mgp4591 @ Dec 19 2015, 09:03 PM) *

QUOTE(cali914 @ Dec 19 2015, 08:42 PM) *

Looking good. If I had to do it over get the 3.2 I think to turn it sideways in the 914 and use the 5 speed with limited slip and axles into the 914 hubs 24 hrs all day and night.Attached Image Attached Image (IMG:style_emoticons/default/driving-girl.gif)

I thought about that also since I worked in a major Honda dealership in the shop. I took the measurements and after you line up the max angles for the CVs and get the trans where it's not dragging on the ground, you end up with the engine partially in the trunk and sticking out about 5 inches worth. I hated to give up on the idea because it's such a sweet package all in one - plus you could call it a Pornda... (IMG:style_emoticons/default/shades.gif)

Wow I'm glad you shared that information, because my friend Chris was under the assumption it would drop right in
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mgp4591
post Dec 20 2015, 02:09 AM
Post #20


914 Guru
*****

Group: Members
Posts: 5,481
Joined: 1-August 12
From: Salt Lake City Ut
Member No.: 14,748
Region Association: Intermountain Region
QUOTE(cali914 @ Dec 19 2015, 10:16 PM) *

QUOTE(mgp4591 @ Dec 19 2015, 09:03 PM) *

QUOTE(cali914 @ Dec 19 2015, 08:42 PM) *

Looking good. If I had to do it over get the 3.2 I think to turn it sideways in the 914 and use the 5 speed with limited slip and axles into the 914 hubs 24 hrs all day and night.Attached Image Attached Image (IMG:style_emoticons/default/driving-girl.gif)

I thought about that also since I worked in a major Honda dealership in the shop. I took the measurements and after you line up the max angles for the CVs and get the trans where it's not dragging on the ground, you end up with the engine partially in the trunk and sticking out about 5 inches worth. I hated to give up on the idea because it's such a sweet package all in one - plus you could call it a Pornda... (IMG:style_emoticons/default/shades.gif)

Wow I'm glad you shared that information, because my friend Chris was under the assumption it would drop right in

"Dropping in" is usually a relative concept... (IMG:style_emoticons/default/idea.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

4 Pages V  1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 23rd November 2024 - 07:18 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...