ENGINE REMOVAL 10-9-05, Need Assistance Options

[Aaron Cox]

I happen to have brandoholios CV tool at mi casa....

i can bwing it....

and the piece of metal i got. we could fab up brians stuff and be done in an hour (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

AA

[TINCAN914]

QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM)

I resent what someone said... cept I forgot what they said. I R old and don't know 2 much sometimes. Right on about the welder... Good show..!!!!!!!! Do ya need rotors or brakes? I have some cores for each. Do ya need any small parts? let me know... Who is bringing the CV tool? Brando? Note to bmunday.. DON'T have everything ripped out of the car before we get there. There won't be anything to do ..!!!!!!!!!!!!!!!!!!! Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!! Yo, B I'll see ya arounf 9:30 sat. morning.... Might bring a woman to keep us company... Oh... never mind.. MattR is coming..... (IMG:http://www.914world.com/bbs2/html/emoticons/owned.gif) Twystd1 young guys my ass... Why I outa.....................

Twystd1 No need to worry there will be plenty to do I'msure.ee ya around 9:30....

Bison? I hear that's tasty.....
Should I buy an engine stand? I don't want to spend the cash if it's not necessary. I was hoping the dolly would be sufficient, but I will if necessary. ANy suggestinos on what to buy, without breaking the bank? (I wonder if sirandy can produce an icon smily face squeexing the shit out of a penny?)

[Twystd1]

GOD... I do so love this place they call the 914Club......

I will see if there is any wild game left at Bills and Phils...
If so... I will bring it along......

If not... No Cigar....

Twystd1

[Twystd1]

Engine stand not needed. (They are nice to have though)

A CLEAN bench for assembly is needed.

For dissasembly.. A kinda clean bench is needed.

For Aaron... a small bench is needed........... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

Twystd1

[Aaron Cox]

So.. 10 am....

by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system?

whats next?

[TINCAN914]

QUOTE (Aaron Cox @ Oct 4 2005, 07:22 PM)

So.. 10 am.... by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system? whats next?

Shit I don't know... I need some feedback on prepping for paint. THetcar seems to have about 3-4 coats of paint onit. I think to get a nice finish it should be taken down to bare metal... I'm sure I have pelenty to dobefore I get that far though. Fuel ines, brake lines, etc. I'm sure those need to be replaced.. I am very open to suggestions. I would like to drive the car befoe I retire though.

[Crazyhippy]

QUOTE (bmunday @ Oct 4 2005, 07:32 PM)

I would like to drive the car before I retire though.

So much for the pull your motor party then.... once a 914 gets comfortable on jackstands... it's done for (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif)

[TINCAN914]

QUOTE (Crazyhippy @ Oct 4 2005, 07:44 PM)

QUOTE (bmunday @ Oct 4 2005, 07:32 PM) I  would like to drive the car before I retire though. So much for the pull your motor party then.... once a 914 gets comfortable on jackstands... it's done for (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif)

LOL!!!
Well I want to doo it right, but I want to be able (man my typing sux after I have had a few beers) drive it and workonit at the same time if at all possible.. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

[TINCAN914]

Ok here are a couple of pics justtook them. Not the greatest, kinds dark, but will give it a shot anyway.

Rotor, is this bad???? I wonder how long he ran without new pads...

Picture on the stands...Hell hole small rust damageon the inner panels.

[TINCAN914]

on stands Hopefully it wont get to uuse to it.

[TINCAN914]

battery damage,needs patch

[TINCAN914]

Is this bad???? Man sweetrotor damage... (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)

[Twystd1]

YYeeeks... it's done for..

I'll give ya 300 bucks for the whole car......


Ok, Ok, Ok, It's fixable... By anyone other than me. I just talk and act interested.

Looks like if Skline can show up he can give ya some pointers on the rust repair.

Skline IS the real deal.. He welds up and fixes stuff I woulda trashed or given up on.
And it looks spot on.. (unless Aaron helps)

Looks like a good time. Sounds like 10 guys will be there.

Lets see... At 1.5 Lbs of steak per 10 guys. Plus bri's family.. Hmmm That equals 49 Lbs of Prime Steaks. Plus .. Let's see.. 10 guys times 30 beers equals 300 beers plus Bri's family equals 534 beers and two bottles of water for me.....

Dude... you should get this engine pulled for a little under a grand..!!!!

Crap I forgot about the potato salad... Make that a bit over a grand.

OhCrap... I forgot about the shrimp cocktail.... equals 130.00 USD Plus.........

Fugit... Cook burgers...... (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)

Twystd1
(IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)

[skline]

That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though.

[TINCAN914]

The rust in the engine compartment really isn't that bad. Well I don't think so... THe holes are actually smaller then they appear. The rotos are nothing. Need replacement, just thought it was funny how bad they appear.

Shit I beeter go take out an equity loan to pay for beer... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

[TINCAN914]

QUOTE (skline @ Oct 4 2005, 09:00 PM)

That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though.

That would be very cnice of you, thanks. Hope you can make it.... Would like to get to knwo everyone on the board.

[kdfoust]

QUOTE (skline @ Oct 4 2005, 07:03 AM)

I am thinking that you and Kevin should come over at least to watch. If I dont have to work, I will be there. I have dropped an engine and tranny in less than an hour by myself. As the locals will tell you, I had a lot of practice. If I can get my speedo drive gear fixed in the Chalon, I may drive it down, otherwise, it will be the truck and some parts for you. I know I have a good set of rear rotors here. I also have a few jacks and stands too. Tell Kevin (Kdfoust) to wait on his car and then we will all go over to his house and help him with his car. Is he doing the 6 in his green car? I was wondering what happened to him, he used to come out to all of our runs and events. Great guy. I may be working tonight which would put me in line to work again this weekend but maybe it will be Sunday and not Saturday. We will see.

Hey Scott. Kevin here. Yup, 3.2-6 into the green car. The engine is here. No f'n waiting on this -6 conversion. I've been messing around with engines for this car too long already. I already got the crew lined up. Three of "the crew," will kick my a** if I don't get this engine in the car post-haste!

See ya round,
Kevin
(IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif)

[TINCAN914]

QUOTE (Twystd1 @ Oct 2 2005, 10:36 PM)

I'm gunna bring my good old trusty RED tool box with me just for Shi%s and Grins... Ya just never know what we may need... Why don't you spend a bit "O" time and make a list of all the stuff you might need for this project. And POST IT HERE..!!!! At least if any of us has some extras we can bring em with us. So what ya need? C'Mon dude.. I have a storage full of parts. You will help me by helping you... Twystd1

New addition to list of things I need. Exhaust.. rusted all to hell. I know it's expensive and everyone wants one, but if you don't ask you don't know.. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) Carbs, again center console, . Once the engine is out, I'm sure I will come up with a great deal more.. I have a feeling I haven't even scratched the surface.

[Type 4 Unleashed]

QUOTE (bmunday @ Oct 4 2005, 08:50 PM)

Is this bad???? Man sweetrotor damage... (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)

Just have them Wide Arch Welded, then Turned, they'll be as good as new (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif)

[TINCAN914]

QUOTE (V6914 @ Oct 5 2005, 06:25 PM)

QUOTE (bmunday @ Oct 4 2005, 08:50 PM) Is this bad???? Man sweetrotor damage... (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)  :shoot2kill:  :shoot2kill:  :shoot2kill: Just have them Wide Arch Welded, then Turned, they'll be as good as new (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif)

Skline said he had a set he would donate.... If not no real biggie, I have more pressing things to take care of anyway.