Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

4 Pages V  1 2 3 > »   
 Reply to this topicStart new topic
> BUILD-OFF CHALLENGE: Dakotaewings 74 LS Conversion, Longest time on Jackstands?
dakotaewing
post Mar 11 2006, 11:44 PM
Post #1


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
Starting my update for the build-off.....
This one has been going on too long -
Looks like the last update was 6 years ago - Yikes!
Here's a recent photo of me and the car....
And the original first image for this post on the bottom.






I have been participating in 914 events and on the boards for more than a few years now, although only posting a few times a week...

There are a few of the contingent from the Texas group and from the MUSR's that have accused me of not having a car at all.... Including Clay and James West....

So, just to make it clear that a car does actually exist, even though it be on jackstands... Here is Bullit in my driveway... Notice in one of the pics the Suburban that I auto crossed year before last many years ago at MUSR 6...???

I will post additional photos of the progress as things move along, but keep in mind I have had this tub over 5 15 years...

This post has been edited by dakotaewing: Nov 1 2015, 01:21 PM


Attached thumbnail(s)
Attached Image

Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
redshift
post Mar 11 2006, 11:55 PM
Post #2


Bless the Hell out of you!
**********

Group: Members
Posts: 10,926
Joined: 29-June 03
Member No.: 869
(IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)




Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 12:02 AM
Post #3


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
That's great Miles...


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 12:07 AM
Post #4


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
Another...


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 12:11 AM
Post #5


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
Again..


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
redshift
post Mar 12 2006, 12:18 AM
Post #6


Bless the Hell out of you!
**********

Group: Members
Posts: 10,926
Joined: 29-June 03
Member No.: 869
You're blowin' it with the other pictures.

(IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)


M
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 12:28 AM
Post #7


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
QUOTE (redshift @ Mar 12 2006, 01:18 AM)
You're blowin' it with the other pictures.

(IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)


M

Ya,
And after seeing the quality of the first pic it only took me about 10 tries to get the quality up to the point it would'nt time out on my stinkin dail (IMG:http://www.914world.com/bbs2/html/emoticons/owned.gif) up.....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
redshift
post Mar 12 2006, 12:58 AM
Post #8


Bless the Hell out of you!
**********

Group: Members
Posts: 10,926
Joined: 29-June 03
Member No.: 869
(IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

Wash your dial-up...

I suggest using Dial..



M
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Lou W
post Mar 12 2006, 01:32 AM
Post #9


"Here Kitty Kitty" my ass......
****

Group: Members
Posts: 4,109
Joined: 9-May 04
From: Roseburg, OR.
Member No.: 2,039
Region Association: Spain
Looks good, are those fiberglass flairs? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 08:47 AM
Post #10


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
QUOTE (Lou W @ Mar 12 2006, 02:32 AM)
Looks good, are those fiberglass flairs? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

Yes -
They are fiberglass - they have been on the car since I brought it home 5 years ago - I had the body man that I bought the car from install them...it was part of the deal...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ClayPerrine
post Mar 12 2006, 08:47 AM
Post #11


Life's been good to me so far.....
***************

Group: Admin
Posts: 15,899
Joined: 11-September 03
From: Hurst, TX.
Member No.: 1,143
Region Association: NineFourteenerVille
Nice Photoshop job...

And I am not referring to Miles' amateur work. (IMG:http://www.914world.com/bbs2/html/emoticons/poke.gif)


Where did you steal the picture of the 914 on jack stands?? (IMG:http://www.914world.com/bbs2/html/emoticons/poke.gif)


Seriously,

What can we do to help you get it up and running? A reassembly party? Betty says anyone who has poked fun at you for the phantom 914 is now morally bound to help.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 09:24 AM
Post #12


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
QUOTE (ClayPerrine @ Mar 12 2006, 09:47 AM)
Nice Photoshop job...  

And I am not referring to Miles' amateur work.    :poke:


Where did you steal the picture of the 914 on jack stands??   (IMG:http://www.914world.com/bbs2/html/emoticons/poke.gif)


Seriously,

What can we do to help you get it up and running?  A reassembly party?  Betty says anyone who has poked fun at you for the phantom 914 is now morally bound to help.

Clay -

I need to get the car painted, and I stilll need parts....
I found a motor in MO this weekend that I will be driving up in the next week to 10 days to pick up... I have the renegade adapter, flyflywheel, clutch, and pressure plate. I need a good radiator and fans. I also need 3.5" front struts for the 5 lug swap. I have most of the expensive stuff for the rears. I will also need wheels and tairs. At this point I am probably going to paint the car in the garage. If you can help me do that, it will be a good start.


(IMG:http://www.914world.com/bbs2/html/emoticons/av-943.gif)

Then you can rewire the car... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TINCAN914
post Mar 12 2006, 09:31 AM
Post #13


Summer's Commin...
****

Group: Members
Posts: 2,440
Joined: 18-August 05
From: Colorado Springs, CO.
Member No.: 4,611
Region Association: Rocky Mountains
Lookin good!! Keep it up..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dennisc
post Mar 12 2006, 09:41 AM
Post #14


Member
**

Group: Members
Posts: 90
Joined: 1-September 04
From: Marshall, MO
Member No.: 2,671
Thom--I take it all back. Good looking tub. That motor in MO--would that be Missouri? and if so what part? Are you getting close to me?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 12 2006, 09:51 AM
Post #15


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
QUOTE (dennisc @ Mar 12 2006, 10:41 AM)
Thom--I take it all back.  Good looking tub.  That motor in MO--would that be Missouri? and if so what part?  Are you getting close to me?

The motor is in Springfield... The transaction is not offical at this point - I need to find someone with desktop dyno to run the #'s for me.... Dennis, how close is that to you ??
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dennisc
post Mar 12 2006, 09:58 AM
Post #16


Member
**

Group: Members
Posts: 90
Joined: 1-September 04
From: Marshall, MO
Member No.: 2,671
I'm in north central. East of Kansas City, so it's about 150 miles or so.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ClayPerrine
post Mar 12 2006, 02:43 PM
Post #17


Life's been good to me so far.....
***************

Group: Admin
Posts: 15,899
Joined: 11-September 03
From: Hurst, TX.
Member No.: 1,143
Region Association: NineFourteenerVille
QUOTE (dakotaewing @ Mar 12 2006, 09:24 AM)
QUOTE (ClayPerrine @ Mar 12 2006, 09:47 AM)
Nice Photoshop job...  

And I am not referring to Miles' amateur work.    :poke:


Where did you steal the picture of the 914 on jack stands??   (IMG:http://www.914world.com/bbs2/html/emoticons/poke.gif)


Seriously,

What can we do to help you get it up and running?  A reassembly party?  Betty says anyone who has poked fun at you for the phantom 914 is now morally bound to help.

Clay -

I need to get the car painted, and I stilll need parts....
I found a motor in MO this weekend that I will be driving up in the next week to 10 days to pick up... I have the renegade adapter, flyflywheel, clutch, and pressure plate. I need a good radiator and fans. I also need 3.5" front struts for the 5 lug swap. I have most of the expensive stuff for the rears. I will also need wheels and tairs. At this point I am probably going to paint the car in the garage. If you can help me do that, it will be a good start.


(IMG:http://www.914world.com/bbs2/html/emoticons/av-943.gif)

Then you can rewire the car... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)

I don't really do paint and body. I can, but it takes me forever. That's why I paid someone to do mine. I can help with the transmission, the wiring, and maybe the wheels. I have a set of 16" C2 wheels that may be right for you.


16x7 fronts and 16x8 rears.

If you are interested, you can come take a look at them.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dave_Darling
post Mar 12 2006, 03:42 PM
Post #18


914 Idiot
***************

Group: Members
Posts: 15,059
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California
QUOTE (ClayPerrine @ Mar 12 2006, 06:47 AM)
Nice Photoshop job...

And I am not referring to Miles' amateur work.

I agree! I think you even got the shadows right when you added the jackstands underneath that levitating 914 of yours!!! (IMG:http://www.914world.com/bbs2/html/emoticons/shocked[1].gif)

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
spare time toys
post Mar 12 2006, 04:22 PM
Post #19


hooked on grilling food.
****

Group: Members
Posts: 4,059
Joined: 3-April 04
From: West Plano Tx
Member No.: 1,884
Region Association: Southwest Region
QUOTE (dakotaewing @ Mar 12 2006, 10:24 AM)
I found a motor in MO this weekend that I will be driving up in the next week to 10 days to pick up...

Wish you would have got ahold of me. I walked in from driving back from K.C. MO, about a half hour ago. I could have shot over and threw it in the back of Dads truck and hauled it back (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dakotaewing
post Mar 13 2006, 08:59 AM
Post #20


Senior Member
***

Group: Members
Posts: 1,163
Joined: 8-July 03
From: DeSoto, Tx
Member No.: 897
Region Association: Southwest Region
Thanks for the comments guys -

Clay - if you have pics of the wheels, please email or PM me...

Larry - Thanks for the offer, but this guy has multiple engines and heads -
I am trying to figure out at this point what set of heads I want...

If any one on the board is familar with sbc blocks, heads, cams. and desktop dyno or another similar program, please chim in... I could use some help -

Thanks -
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

4 Pages V  1 2 3 > » 
Reply to this topicStart new topic
16 User(s) are reading this topic (16 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 22nd November 2024 - 08:21 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...