Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Model Specific Information

914/4: 70 71 72 73 74 75 76 914/6: 70 71 72

22 Pages V  1 2 3 > »   
 Reply to this topicStart new topic
> Wheels and Tires, Let's get this discussion centralized
Pat Garvey
post Apr 3 2007, 08:16 PM
Post #1


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
It ocurs to me that we've forgotten the various combination of wheel offered by the factory for 914's.

I see to recollect (VERY dangerous) that there were:

Steel - four versions (maybe 5)

Alloy - five versions

I know there were different widths available in some, but I'm talking about design.

I'll start - these are 5 1/2J steel wheels from an early car with appearance group. Yes, they've been rstored & no, they do not have the proper flat black center spray around the lugs.

Pat


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jasfsmith
post Apr 4 2007, 09:07 AM
Post #2


Senior Member
***

Group: Members
Posts: 556
Joined: 4-October 04
From: Bangor, ME
Member No.: 2,882
Region Association: North East States
5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970.

And what they look like on the car.

BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly.


Attached image(s)
Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
1970 Neun vierzehn
post Apr 4 2007, 01:19 PM
Post #3


Advanced Member
****

Group: Members
Posts: 3,199
Joined: 16-March 06
From: cincinnati, ohio
Member No.: 5,727
An early 5.5 x 15 Pedrinni


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
1970 Neun vierzehn
post Apr 4 2007, 01:49 PM
Post #4


Advanced Member
****

Group: Members
Posts: 3,199
Joined: 16-March 06
From: cincinnati, ohio
Member No.: 5,727
Pat,
Iffen those be the jackstands you plan to use that show in your initial pic.....GET NEW ONES!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Johny Blackstain
post Apr 4 2007, 01:51 PM
Post #5


Walnut Elite Stratocaster player
****

Group: Members
Posts: 3,434
Joined: 5-December 06
From: The Shenandoah River
Member No.: 7,318
Region Association: MidAtlantic Region
QUOTE(1970 Neun vierzehn @ Apr 4 2007, 03:49 PM) *

Pat,
Iffen those be the jackstands you plan to use that show in your initial pic.....GET NEW ONES!

(IMG:style_emoticons/default/agree.gif) 100%!!


(IMG:style_emoticons/default/cool_shades.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Johny Blackstain
post Apr 4 2007, 02:13 PM
Post #6


Walnut Elite Stratocaster player
****

Group: Members
Posts: 3,434
Joined: 5-December 06
From: The Shenandoah River
Member No.: 7,318
Region Association: MidAtlantic Region
15"x5.5" 4 bolt Creamsicle Mahle.


(IMG:style_emoticons/default/cool_shades.gif)


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 4 2007, 07:55 PM
Post #7


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
QUOTE(1970 Neun vierzehn @ Apr 4 2007, 01:49 PM) *

Pat,
Iffen those be the jackstands you plan to use that show in your initial pic.....GET NEW ONES!

Paulie - what's the prob with the jackstand? I don't get it???!!!
Pat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 4 2007, 07:59 PM
Post #8


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
QUOTE(Jasfsmith @ Apr 4 2007, 09:07 AM) *

5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970.

And what they look like on the car.

BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly.

Are you getting them from Cocker?

Happy to hear from you & hope you're better!!!

Pat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Johny Blackstain
post Apr 5 2007, 01:52 PM
Post #9


Walnut Elite Stratocaster player
****

Group: Members
Posts: 3,434
Joined: 5-December 06
From: The Shenandoah River
Member No.: 7,318
Region Association: MidAtlantic Region
QUOTE(Pat Garvey @ Apr 4 2007, 09:55 PM) *

QUOTE(1970 Neun vierzehn @ Apr 4 2007, 01:49 PM) *

Pat,
Iffen those be the jackstands you plan to use that show in your initial pic.....GET NEW ONES!

Paulie - what's the prob with the jackstand? I don't get it???!!!
Pat

Pat- that is the exact stlye of Jackstand that just failed on Gint. His 914 broke his nose & practically crushed his face. I never had a problem w/ them either but after reading the thread his wife wrote on what happened to him I'm getting rid of mine & using pinned tripods only.


(IMG:style_emoticons/default/cool_shades.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 5 2007, 07:02 PM
Post #10


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
I' wichha Johnny!

Going shopping tomorrow for new stands, even though the ones I use have never created a problem.

Nothing wrong with better technology!
Pat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jasfsmith
post Apr 6 2007, 09:05 AM
Post #11


Senior Member
***

Group: Members
Posts: 556
Joined: 4-October 04
From: Bangor, ME
Member No.: 2,882
Region Association: North East States
QUOTE(Pat Garvey @ Apr 4 2007, 09:59 PM) *

QUOTE(Jasfsmith @ Apr 4 2007, 09:07 AM) *

5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970.

And what they look like on the car.

BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly.

Are you getting them from Cocker?

Happy to hear from you & hope you're better!!!

Pat


Coker Tire complete with inner tubes. $$$ouch. Now all I need to do is find someone with a tire changer who will be gentle with the wheels.

I'm still in recovery from the last surgery. I'm able to go to my office, however after 5-6 hours I run out of steam. Foolishly I tried inspect the front end of the 6 last week. Got down just fine (funny how gravity works that way). Took me 10 minutes to crawl to my bench to pull myself backup.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 6 2007, 08:11 PM
Post #12


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
QUOTE(Jasfsmith @ Apr 6 2007, 09:05 AM) *

QUOTE(Pat Garvey @ Apr 4 2007, 09:59 PM) *

QUOTE(Jasfsmith @ Apr 4 2007, 09:07 AM) *

5 1/2" x 15" 10-spoke MAHLE "gasburner" wheels, optional on 914-6's in 1970.

And what they look like on the car.

BTW, for CW's, even though I got the crests to line up vertically, I was dinged for not having the correct tire size at the Portland Parade. Ouch. New XAS's of the correct size are going on shortly.

Are you getting them from Cocker?

Happy to hear from you & hope you're better!!!

Pat


Coker Tire complete with inner tubes. $$$ouch. Now all I need to do is find someone with a tire changer who will be gentle with the wheels.

I'm still in recovery from the last surgery. I'm able to go to my office, however after 5-6 hours I run out of steam. Foolishly I tried inspect the front end of the 6 last week. Got down just fine (funny how gravity works that way). Took me 10 minutes to crawl to my bench to pull myself backup.


James, it's a start! I know how the gravity thing works too - bad knees & hips & getting worse every year. Keep your spirits up bud - you be OK.

As to the Coker thing - I need to do the same thing. PM me with the cost they quoted you please - I know they're expensive, but they ARE new tires & period correct. I know it won't do you any good in Maine, but there are more & more tire shops with equipment that don't damage the wheels. I just found out about one 10 miles from me that doesn't even touch them. Check around your area. Bet there's a similar place.
Pat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 6 2007, 08:12 PM
Post #13


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
What? No one has Fuchs alloys?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Johny Blackstain
post Apr 6 2007, 09:49 PM
Post #14


Walnut Elite Stratocaster player
****

Group: Members
Posts: 3,434
Joined: 5-December 06
From: The Shenandoah River
Member No.: 7,318
Region Association: MidAtlantic Region
QUOTE(Pat Garvey @ Apr 6 2007, 10:12 PM) *

What? No one has Fuchs alloys?

I do but they're not original 914, more like original 944 (IMG:style_emoticons/default/rolleyes.gif) .


(IMG:style_emoticons/default/cool_shades.gif)


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jasfsmith
post Apr 8 2007, 09:48 AM
Post #15


Senior Member
***

Group: Members
Posts: 556
Joined: 4-October 04
From: Bangor, ME
Member No.: 2,882
Region Association: North East States
QUOTE

As to the Coker thing - I need to do the same thing. PM me with the cost they quoted you please - I know they're expensive, but they ARE new tires & period correct. I know it won't do you any good in Maine, but there are more & more tire shops with equipment that don't damage the wheels. I just found out about one 10 miles from me that doesn't even touch them. Check around your area. Bet there's a similar place.
Pat


No deals, straight $191 per tire plus $24.95 for the inner tube. They had a good price on Vredestein Sprint's ($89/per) which recall seeing on several 914's back in the early '70's. I opted for the XAS's having the original mounted spare.

Coker tire web: www.store.coker.com

(BTW, I scored a set of year old XAS's, (new, with original shipping labels and shiiping straps as received by the eBay seller from Coker) off eBay at half the price. Still had to by the inner tubes though. Damn, they are skinny.)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post Apr 30 2007, 04:11 AM
Post #16


914 Freak!
***************

Group: Retired Admin
Posts: 20,179
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
(IMG:http://www.914world.com/members/markd/misc/wheel/fuchA.jpg)
Four bolt fuchs. Black backgrounds are not original. - 5.5 x 15

(IMG:http://www.914world.com/members/markd/misc/wheel/pedriniA.jpg)
Pedrini - 5.5 x 15

(IMG:http://www.914world.com/members/markd/misc/wheel/mahleA.jpg)
Mahel - 5.5 x 15
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Pat Garvey
post Apr 30 2007, 07:27 PM
Post #17


Do I or don't I...........?
*****

Group: Members
Posts: 5,899
Joined: 24-March 06
From: SE PA, near Philly
Member No.: 5,765
Region Association: North East States
Thanks McMark - burgers on me!

Finally a Fuchs, though that black stuff needs to come off!

What about wheels from the sixers?!
Pat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post May 7 2007, 04:10 AM
Post #18


914 Freak!
***************

Group: Retired Admin
Posts: 20,179
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
More wheels:

Attached Image
These are the fuchs that came on the 914/6. These are 14 x 5.5". The pictures is on a 912, but the wheels are identical.

Attached Image
This is the original finish on four bolt fuchs. Again, 15 x 5.5".

Attached Image
This is a bad picture of the other style of steel wheel. Again, 15 x 5.5"

The list of original wheels, according to the PET are:

914/6 - steel, fuchs, mahles
914 - steel early/hubcap, steel late, fuchs, pedrini, mahle
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jonferns
post May 11 2007, 10:03 PM
Post #19


Advanced Member
****

Group: Members
Posts: 2,081
Joined: 29-March 07
From: New Jersey
Member No.: 7,631
Region Association: North East States
heres mine...
(IMG:http://i133.photobucket.com/albums/q44/sendjonathanmail/IMG_1280.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
DanT
post May 12 2007, 12:37 AM
Post #20


Going back to the Dark Side!
****

Group: Members
Posts: 4,300
Joined: 4-October 04
From: Auburn, CA
Member No.: 2,880
Region Association: None
here are mine after hand polishing


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · Originality and History · Next Newest »
 

22 Pages V  1 2 3 > » 
Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 24th November 2024 - 05:45 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...