'73 Resto & Suby 6 Conversion, or a primer on "How to convert your 914 to a Subaru 3.0" Options

[76-914]

What's it been? A year since I got Blackie running. I finally get it tuned to a daily driver status and should have been happy as a Lark then but what do I do? I sold the engine (w/90 hour's on the Hobbs) on the last Dawn Patrol GMR run. So I pulled the engine and began preparing Blackie for her transformation.


Before I go any further check out my Jack Stands. Min height 19.5", 12 ton and should hold up to a 6.7 quake or direct nuclear attack.


And out she comes.




One thing you have to love about these cars is that you can remove an interior in 15 minutes. 30 min's if you have a console. This was one shot before the interior is gutted.

and an hour later I'm scraping tar floorboards.

[Jon H.]

I have an eg33 that will be going into my westfalia and there is a company called Small car that has wiring harness modification directions. I know this is for westfalias but it should work for what your doing too.

From the website-
"This kit enables a person with some wiring ability and lots of time to take a Subaru "bulkhead" wiring harness, remove a large number of connectors and wires, splice and add some wiring and end up with just what is necessary to run the engine in another vehicle. These wiring kits are unique to each Subaru year and model. Please note that this kit is a guide for harness modification and not a step by step manual. The expected time commitment to convert a harness is 20-40 hours for the first timer."

Jon