Epic Scrap Metal., An idiots guide to saving a fourteener. Options

[fordb132]

Hi everybody from Norway.I'm starting a new project here as I found the remains of a 914 for 300 usd.It was cut into three parts to make it easier to bring it to the scrap yard.I lost my job,so I have plenty of time and less money.
This car has nearly nothing left of the outside body panels,so I feel free to make some fun out of it.There is very much structural rust to fix first and thanks to Brians Machine Service I have a 911 roof I want to weld on top of the 914 chassis.
This is a long term project I want to shear with you.I have a plan....
Lets put on some good music in the workshop and start up the welding machine.

[fordb132]

That gas pedal is made from 2 mm ss,glued a piece from the remains of the original pedal in the back so I could use the accelerator rod.Make a copy,Chris.
Working with the doors now.Moved the A-pillars in 25 mm and the upper hinges down 50 mm.Don't know how it will turn out....
Seems there are few norwegian members on this forum.I expected some creative criticism from Sunroad,at least.
Falcor...Gasoline Magazine has finally got their eyes open for classic Porsche so I think your car should be in the next issue......?

[MrsWannaB]

Seems there are few norwegian members on this forum.I expected some creative criticism from Sunroad,at least.

Well, I can reassure you, Sunroad is watching from a corner of your virtual workshop. Humbly impressed as usual, in this case to silence.
However, unike most others in here, I'm not surprised by what you can do.

When it comes to creative criticism, I'm sure you have it all under control. You can give that steering wheel to Cuda or Krieger, but beyond that, your artwork is no less than stunning, my friend. You are the obvious winner of the title Mr 914 Norway 2017.